Sẽ mở trong thẻ mới
Innovative Air Quality Solutions
● HEALTHCARE & CLINICAL ENVIRONMENTS | COMMERCIAL IAQ SOLUTIONS

Cleaner Air for Healthcare & Clinical Spaces

HisoAir provides configurable air purification and IAQ platforms for healthcare and clinical environments where space efficiency, continuous operation, acoustic comfort, filtration performance, and facility maintenance matter.
Discuss Your Healthcare IAQ ProjectExplore Clinical Deployment Solutions
Commercial & Healthcare-Adjacent Deployment Experience
Ceiling + Wall-Mounted Purification Platforms
Filtration, Testing & Compliance Engineering
HisoAir HA200/400 Wall-Mounted Residential Air Purifier Installation
● Ceiling-mounted and wall-mounted air purification in a healthcare or clinical environment
Healthcare IAQ Platform
COMMERCIAL & CLINICAL DEPLOYMENT
Product configuration, filtration, sensing, and installation requirements are defined according to the specific clinical environment, target market, and project scope.
HEALTHCARE IAQ REQUIREMENTS

Healthcare Air Purification Requires More Than High CADR

Healthcare and clinical spaces combine continuous occupancy, acoustic sensitivity, limited installation space, facility-managed maintenance, varying room sizes, and application-specific filtration requirements. An effective IAQ solution must therefore consider product placement, airflow, filtration, sensing, maintenance, and compliance together.

Continuous Air Cleaning in Occupied Spaces
Quiet Operation Around Patients & Staff
Space-Efficient Installation
Application-Specific Filtration
IAQ Visibility & Optional Smart Control
Lower Facility Maintenance Burden

In healthcare deployment, the challenge is not only how much air a purifier can move—it is how reliably the system can operate around people, equipment, maintenance teams, and real clinical workflows.

HisoAir Slimline Air Purifier Flush-Mounted in Residential Living Room
Healthcare IAQ deployment using ceiling-mounted and wall-mounted air purifiers with optional environmental sensing
PURIFY → MONITOR → MAINTAIN:
Wall-mounted + ceiling-mounted platforms for different clinical spaces
HEPA filtration, optional sensing, IoT integration, and lower-maintenance configurations
CORE CAPABILITIES • RELATIONSHIP: RELATED_CAPABILITIES

Relevant HisoAir Capabilities

The Residential application references HisoAir's centralized engineering capability repository. Each capability provides full laboratory test reports, acoustic testing curves, and OEM customization options.

Ultra-Quiet Airflow Platform
Ultra-Quiet Airflow

Ultra-Quiet Airflow Design

Engineer quieter air purification systems by balancing airflow, purification performance, fan control, and acoustic comfort across real residential, commercial, and institutional environments.

View Capability →
Ultra-Quiet Airflow Platform
COMPLIANCE ENGINEERING SUPPORT

Product Certification & Compliance Support

Integrate safety, EMC, wireless, ozone, performance, materials, labeling, and market-specific compliance requirements into product development before tooling and mass production.

View Capability →
Ultra-Quiet Airflow Platform
FILTRATION PLATFORM ENGINEERING

HEPA H13 / H14 Filtration Platform

Configurable HEPA H13 and H14 filtration platforms for premium residential, commercial, healthcare-adjacent, institutional, and OEM / ODM air purifier projects.

View Capability →
APPLICATION HIGHLIGHTS • SCENARIO DEPLOYMENT

Where These Platforms Fit

Targeted residential living zones engineered for optimal airflow distribution, acoustic thresholds, and architectural placement.

Bedrooms & Sleep Spaces

Offices & Workspaces

HisoAir helps brands, facility solution providers, and workplace technology companies build scalable office IAQ systems combining air purification, environmental sensing, connected control, and commercial deployment support.
Explore Suitable Platforms →
Bedrooms & Sleep Spaces

Schools & Kindergartens

HisoAir helps schools, education solution providers, and facility partners build quieter, space-efficient and measurable indoor air quality systems combining air purification, environmental sensing, connected control, and lower-maintenance operation.
Explore Suitable Platforms →
Bedrooms & Sleep Spaces

Healthcare & Clinical Spaces

HisoAir provides configurable air purification and IAQ platforms for healthcare and clinical environments where space efficiency, continuous operation, acoustic comfort, filtration performance, and facility maintenance matter.
Explore Suitable Platforms →
PRODUCTION PLATFORMS • RELATIONSHIP: RELATED_PRODUCTS

Recommended Residential Platforms

Validated OEM/ODM hardware platforms configured specifically for residential programs. Sourced directly from HisoAir's product catalog.

HA180 / HA380 Fabric Panel Platform

HA200 & HA400 Standing & Wall-Mounted Air Purifier

A flexible air purification platform designed for both wall-mounted and freestanding installation. Available in two airflow capacities, it combines a slim profile, quiet operation, H13 HEPA filtration, real-time PM2.5 sensing, and configurable smart features for a wide range of indoor environments.
Flexible Wall-Mounted & Freestanding Design — Supports vertical or horizontal wall mounting as well as freestanding installation, providing flexible deployment with a slim 144 mm wall-mounted profile.
High-Performance & Quiet Purification — HA200 delivers up to 200 m³/h CADR and HA400 up to 380 m³/h, with H13 HEPA filtration and low-noise operation starting from 25 dB(A).
Smart & Configurable Platform — Standard PM2.5 sensing with optional CO₂, temperature, humidity, TVOC, light, noise and occupancy sensors, plus Wi-Fi, Tuya and Matter over Thread connectivity options.
View Product →hisoair.com ↗
HA180 / HA380 Fabric Panel Platform

HA2000 High-Capacity Ceiling-Mounted Air Purifier

A high-capacity ceiling-mounted air purifier designed for larger indoor environments requiring powerful airflow and space-efficient installation. It combines multi-level airflow control, H13 HEPA filtration, quiet operation, occupancy sensing, and configurable smart features in a durable metal platform.
High-Capacity Air Purification — Delivers four airflow levels from 800 to 2000 m³/h (470–1177 CFM), with H13 HEPA filtration for high-volume air circulation and particle removal.
Space-Saving Ceiling Installation — Fixed ceiling-mounted design keeps the purification system away from usable floor and wall space while supporting coverage of approximately 150–200 m².
Smart & Configurable Platform — Includes proximity sensing, LED display and remote control, with optional PM2.5, CO₂, Wi-Fi/Tuya, activated carbon filtration and UVC configurations.
View Product →hisoair.com ↗
HA180 / HA380 Fabric Panel Platform

HA180 & HA380 Standing & Wall-Mounted Air Purifier

A versatile air purification platform designed for both wall-mounted and freestanding installation. With a slim profile, quiet operation, H13 HEPA filtration, real-time PM2.5 sensing, and configurable filtration and smart features, it provides flexible air quality management across a wide range of indoor environments.
Flexible Wall-Mounted & Freestanding Design — Supports vertical or horizontal wall mounting as well as freestanding installation, with an ultra-slim 144 mm wall-mounted profile.
Quiet, Efficient HEPA Purification — HA180 delivers up to 200 m³/h CADR and HA380 up to 360 m³/h, with H13 HEPA and activated carbon filtration and low-noise operation starting from 25 dB(A).
Smart & Highly Configurable Platform — Standard PM2.5 sensing with optional temperature, humidity, CO₂, TVOC, noise, light and occupancy sensors, plus optional Tuya, Matter over Thread, H14 HEPA, activated carbon, UVC and plasma configurations.
View Product →hisoair.com ↗
FAQ • OEM / ODM PROGRAM ANSWERS

Frequently Asked Questions

Direct factory answers regarding residential testing protocols, private-label customizations, and sample evaluations.

The appropriate platform depends on room size, occupancy, airflow requirements, acoustic expectations, installation constraints, maintenance access, and the intended use of the space. Wall-mounted systems can suit patient rooms, senior-living rooms, private treatment spaces, and smaller clinical areas, while ceiling-mounted platforms can support dental rooms, waiting areas, treatment rooms, shared spaces, and larger healthcare environments.

Category:Deployment

No. The appropriate filtration configuration depends on the application, product requirements, target market, performance goals, and applicable standards. HisoAir can support HEPA H13 and H14 options together with activated carbon and other application-specific filter structures where required.

Category:Filtration

A product should not be described as medical-grade or as a medical device unless the specific model, intended use, regulatory classification, testing, and certification support that claim. HisoAir provides air purification platforms for healthcare and healthcare-adjacent environments, while product claims and regulatory scope should be defined for each project.

Category:Compliance

Yes. Depending on the project, HisoAir can support environmental sensing for parameters such as PM, CO₂, VOC, temperature, humidity, occupancy, and other indoor environmental conditions. The available sensing configuration depends on the selected sensor hardware and project requirements.

Category:IAQ Monitoring

Maintenance planning can combine extended-life filter configurations, accessible filter replacement, standardized product platforms, filter-life monitoring, replacement reminders, and centralized device management where required. Actual filter replacement intervals depend on usage and environmental conditions.

Category:Maintenance

HisoAir can support compliance planning, design review, pre-compliance testing, certification sample preparation, technical documentation, and coordination with qualified third-party laboratories and certification bodies. Certification requirements depend on the product category, intended use, target market, electrical architecture, connectivity, and final product claims.

Category:Certification
Contaminant Engineering•3 min read

PFAS Water Filtration Technologies Explained: Carbon, Resin & RO

Key Takeaway:

PFAS reduction depends on the specific compounds present, treatment media, contact time, water chemistry, and system design. Activated carbon, ion exchange, and Reverse Osmosis address PFAS through different mechanisms.

PFAS are a large family of persistent fluorinated compounds that can occur in drinking-water supplies. Their treatment behavior varies significantly by molecular structure, chain length, functional group, concentration, and the chemistry of the source water.

Granular Activated Carbon (GAC) removes PFAS primarily through adsorption. It is generally more effective for many longer-chain PFAS, while shorter-chain compounds tend to break through more quickly. Carbon performance depends on media properties, Empty Bed Contact Time (EBCT), competing organic matter, loading, and replacement frequency.

Ion-exchange resins use charged functional sites to capture many PFAS compounds. Properly selected anion-exchange media can provide high capacity and may perform better than conventional activated carbon for some shorter-chain PFAS, although performance still depends on water chemistry and competing ions.

Reverse Osmosis (RO) uses membrane separation rather than adsorption. Properly designed RO systems can provide broad reduction across many PFAS compounds as well as dissolved salts and other contaminants. Unlike carbon or resin, however, RO also produces a concentrate stream that must be managed.

No single technology should be selected from a PFAS label alone. System design should consider which PFAS compounds are present, their concentrations, required reduction targets, flow rate, media life, and the applicable third-party certification or validation requirements.

HisoAir Water Technical Series
Product Discovery•3 min read

How to Choose an Under-Sink Water Purifier for Modern Kitchens

Key Takeaway:

Match the treatment technology to your water quality first, then evaluate cabinet space, faucet configuration, flow rate, drain and power requirements, and filter replacement needs.

Choosing an under-sink water purifier starts with water chemistry. Carbon filtration is well suited to chlorine, taste, odor, and many organic contaminants, while Reverse Osmosis is more appropriate when dissolved salts, fluoride, nitrates, or broader dissolved contaminants need to be reduced.

For compact kitchens, tankless RO systems eliminate the conventional storage tank and can significantly reduce the space required under the sink. However, membrane capacity stated in GPD does not directly equal faucet flow. When comparing systems, check the actual dispensing flow rate, inlet-pressure requirement, recovery ratio, and whether a booster pump is required.

Installation architecture also matters. Many RO systems require a drain connection, electrical power, and either a dedicated drinking-water faucet or a compatible multi-function faucet. High-flow carbon systems can often connect directly to the existing cold-water line with a simpler installation, but pressure drop and available faucet flow should still be verified.

RO also removes much of the naturally occurring dissolved mineral content. Where taste or mineral balance is a priority, a post-RO remineralization stage can be added. Filter life should be evaluated by both rated capacity and local water quality rather than replacement time alone.

The right system is therefore not simply the smallest or highest-GPD model. It is the configuration that matches the target contaminants, available cabinet space, desired faucet setup, peak dispensing demand, and maintenance expectations.

HisoAir Water Technical Series
Water Quality•2 min read

What Does TDS Mean in Drinking Water? Measurement vs Contaminant Reality

Key Takeaway:

A TDS meter estimates the overall concentration of dissolved ionic substances from electrical conductivity. It cannot identify specific contaminants or determine whether water is chemically safe.

Total Dissolved Solids (TDS) refers to the combined concentration of dissolved substances in water. Most handheld TDS meters do not measure TDS directly. Instead, they measure electrical conductivity (EC) and convert that reading into an estimated parts-per-million (ppm) value.

This means a TDS reading can indicate how much dissolved ionic material is present, but not what that material actually is. Calcium, magnesium, sodium, nitrates, and other dissolved ions can all contribute to conductivity, yet a simple TDS meter cannot distinguish between them.

TDS meters are also not suitable for detecting trace contaminants such as PFAS, many VOCs, pesticides, pharmaceuticals, or disinfection byproducts. These substances may be present at concentrations far below the level needed to noticeably change electrical conductivity.

A low TDS reading therefore does not guarantee safe drinking water, and a higher TDS reading does not automatically indicate contamination. Water-treatment decisions should be based on laboratory testing for specific contaminants of concern rather than TDS alone.

HisoAir Water Technical Series
Technology Selection•2 min read

RO vs UF Water Filtration: Understanding Pore Sizes & Dissolved Minerals

Key Takeaway:

Ultrafiltration can reduce bacteria, turbidity, and suspended particles while retaining most naturally occurring dissolved minerals. Reverse Osmosis provides much broader reduction of dissolved salts and smaller contaminants.

Ultrafiltration (UF) typically uses hollow-fiber membranes with pore sizes in the approximate 0.01–0.1 micron range. These membranes physically retain turbidity, suspended solids, colloids, and many microorganisms while allowing dissolved minerals and salts to remain in the water.

Reverse Osmosis (RO) operates at a much finer separation level. Unlike UF, RO can substantially reduce dissolved ions such as sodium, calcium, fluoride, nitrates, and other contributors to total dissolved solids (TDS). This makes RO more suitable when dissolved-salt reduction is a primary treatment objective.

UF generally requires less system pressure and produces little or no continuous concentrate stream in many point-of-use configurations. RO typically requires greater pressure and produces a reject-water stream, but delivers broader contaminant reduction.

For water with acceptable TDS and mineral content, UF can be a simpler mineral-retaining treatment option. Where dissolved salts, fluoride, nitrates, or broader dissolved contaminants are a concern, RO is generally the more appropriate technology.

HisoAir Water Technical Series
Technology Selection•4 min read

Carbon Block vs Reverse Osmosis: Which Fits Your Need?

Key Takeaway:

Choose RO for dissolved inorganic salts and heavy metals; choose Carbon Block for chemical taste/odor, no wastewater, and high line-pressure flow.

Reverse Osmosis (RO) and Carbon Block filtration represent two fundamentally different treatment methods: membrane separation and adsorption. Understanding these differences helps determine which technology is better suited to a specific water-quality requirement.

Reverse Osmosis uses a semi-permeable membrane with pore sizes of approximately 0.0001 microns. It can significantly reduce dissolved inorganic contaminants such as TDS, fluoride, nitrates, and certain heavy metals. Because water must be forced through the membrane, RO systems require sufficient pressure or a booster pump and generate a concentrated wastewater stream.

Carbon Block filtration relies primarily on adsorption through compressed activated carbon, commonly with nominal pore sizes around 0.5–5 microns. It is highly effective for chlorine, chloramines, VOCs, taste, and odor, while allowing substantially higher direct-flow rates without producing wastewater.

From an operating perspective, Carbon Block systems are generally simpler, require less energy, and avoid the water loss associated with RO. RO involves higher system complexity and operating cost, but provides substantially broader reduction of dissolved contaminants that Carbon Block alone cannot address.

HisoAir Water Technical Series

REQUEST A QUOTE