Se abre en una pestaña nueva
Soluciones innovadoras para la calidad del aire
ceiling air purifier ha2000

Ceiling Air Purifier HA2000

Categorías: Purificadores de aire de techo

  • Powerful 250W purification with wide 150–200m² coverage

  • Ultra-quiet operation: 30–53dB noise range

  • High CADR performance: up to 2000m³/h (1177 CFM)

  • Real-time occupancy detection via proximity sensor

  • Dual control: touch button & remote control

  • Advanced HEPA13 + Pre-filter air purification system

  • Optional smart features: UVC, CO₂, PM2.5 sensors, Wi-Fi

  • Durable metal housing with sleek ceiling integration

Solicitar presupuesto

Descripción del producto

HIGH-CAPACITY CEILING PURIFICATION

High-Airflow Purification for Larger Commercial Spaces

The HA2000 is a high-capacity ceiling-mounted air purifier designed for larger commercial environments where strong airflow, permanent installation and floor-space efficiency are important.

With four airflow settings from 800 to 2000 m³/h and a maximum output of 2000 m³/h (1177 CFM), the platform combines high-volume air movement with pre-filtration and H13 HEPA filtration in a fixed ceiling-mounted format.

2000 m³/h 1177 CFM Maximum Airflow
30–53 dB Specified Noise Range*
H13 HEPA Standard Filtration
150–200 m² Recommended Application Area*
HA2000 high-capacity ceiling-mounted air purifier installed in a commercial space
HA2000 ceiling-mounted air purifier airflow design
AIRFLOW PERFORMANCE

Four Airflow Levels for Different Commercial Requirements

Four operating levels allow the HA2000 airflow output to be selected according to room size, occupancy and project requirements. Maximum airflow reaches 2000 m³/h (1177 CFM), while the specified overall acoustic range is 30–53 dB.

Level 1 800 m³/h / 470 CFM
Level 2 1200 m³/h / 706 CFM
Level 3 1700 m³/h / 1000 CFM
Level 4 2000 m³/h / 1177 CFM
Explore Ceiling Air Purifier Engineering →
COMMERCIAL CEILING DESIGN

Designed for Permanent Ceiling Installation

The HA2000 uses a durable metal enclosure with a 1245 × 636 × 360 mm form factor for fixed ceiling-mounted applications. Installing the purification system above the occupied zone helps preserve usable floor and wall space in larger commercial interiors.

  • Fixed ceiling-mounted configuration
  • Metal construction for commercial applications
  • Touch-button and remote-control operation
  • Designed for larger offices, classrooms and commercial areas
HA2000 ceiling-mounted air purifier dimensions and installation layout
HA2000 ceiling-mounted air purifier internal structure
CONFIGURABLE PLATFORM

Standard Proximity Sensing with Optional Smart Upgrades

The standard HA2000 platform includes a sensor de proximidad, LED display, touch-button controls and remote control. Additional sensing, filtration and connectivity functions can be configured according to project requirements.

STANDARD
Proximity Sensor H13 HEPA LED Display Mando a distancia
OPTIONAL
PM2.5 Sensor CO₂ Sensor Carbón activado Wi-Fi / Tuya UVC

Optional functions depend on the final product configuration, target market and project requirements.

* Performance figures and recommended application area should be maintained against the latest approved HA2000 product specification and applicable engineering test data.

Especificaciones

Tensión

110V/ 220V,50-60Hz

Potencia

250W

Ruido

30-53dB

CADR

800m³/h (470 CFM); 1200m³/h (706 CFM)

1700m³/h (1000 CFM); 2000m³/h (1177 CFM)

Cobertura

150-200m²

Sensor

proximity sensor

Mostrar

LED display

Controlar

Touch button + Remote control

Material

Metal

Dimensión 

1245x636x360mm

Peso

45kg

Filtro

Pre filter + HEPA13

Opcional

UVC lamp, PM2.5 sensor, CO2 sensor, WIFI (Tuya), Activated carbon filter

¿Por qué elegir nuestros purificadores de aire?

High-Performance Air Purification
Advanced Filtration Options
99,9% bacteriana
índice de eliminación
CADR alta
(Tasa de suministro de aire limpio)
H13/H14 HEPA Filtration Options
Optional 270–280 nm UVC Module
H14 H13 extended filter life
lifespan HEPA filters
Third-Party Tested Filtration Performance

Los 3 mejores fabricantes de purificadores de aire OEM/ODM de China

Etiquetado privado de purificadores de aire de marca durante décadas

HisoAir ofrece servicios de etiquetado privado de purificadores de aire a clientes que ya han revisado y aceptado el diseño y las especificaciones de los purificadores de aire HisoAir. Una vez firmado el acuerdo, los productos seleccionados se etiquetarán con el nombre del cliente.

Purificadores de aire OEM de principio a fin

HisoAir proporciona servicios de purificador de aire OEM a socios que tienen las especificaciones necesarias en un producto. HisoAir proporciona investigación, diseño, ingeniería, maquetas o modificaciones, pruebas y producciones en serie basadas en el diseño finalizado del cliente.

Logotipo de la empresa 3M en rojo.
logotipo del transportista
logotipo haier
Logotipo de Alen: confianza en la purificación del aire
tcl logo 0
Logotipo de Honeywell - Líder en soluciones de filtración y purificación del aire
Logo LG - Innovador en electrodomésticos inteligentes y soluciones de purificación del aire
Logotipo de Philips - Líder en tecnología sanitaria y soluciones de purificación del aire

Marcas de renombre mundial confían en nosotros

Con más de 20 años de experiencia, estamos especializados en ofrecer soluciones de IAQ que se integran a la perfección con las necesidades de las marcas más reconocidas del mundo. Asóciese con nosotros para conseguir un rendimiento excepcional adaptado a su mercado

TESTIMONIOS

" Encontré el sitio web de hisoair en Google y, para ser sincero, al principio no estaba seguro de que fueran fiables, pero completaron los requisitos de mi proyecto en un mes y medio. Y cuando el proyecto requirió la adición urgente de un sensor de CO2, tenían una nueva muestra terminada en una semana, lo que los convierte en el fabricante más profesional y centrado en el cliente con el que he trabajado "
tms 1
Thomas
Proveedor gubernamental de Alemania
" Todos sabemos que el COVID ha sido un terrible desastre para todo el mundo, especialmente para la India, he comprado purificador de aire de HisoAir, esto ha sido muy útil para mí y mi oficina, casa, familias y amigos.He estado trabajando con Alwen durante los últimos 7 años, que es de HisoAir, puedo que él es una persona muy confiable, muy eficiente y muy profesional ".
testimonios de clientes 2
Ranjith Bala
Importador de productos médicos de la India
" Somos una empresa con más de 15 años de experiencia en el trabajo con instituciones privadas y sectores privados, hemos colaborado con Hiso durante 3 años, y estamos realmente agradecidos por los trabajos que Hiso nos ha proporcionado. Estamos muy agradecidos por la colaboración con Cherry y el Sr. Lee "
testimonios de clientes
Herina
Hospitales y proveedores gubernamentales de Rumanía

Únase a los líderes mundiales que confían en nuestra experiencia en soluciones de filtración de aire.

Su consulta nos importa. En breve nos pondremos en contacto con usted, y sus datos estarán siempre seguros.
Llevamos 3 años colaborando con Hiso, y estamos muy agradecidos por los trabajos que nos ha proporcionado. Estamos muy agradecidos por la colaboración con Cherry y el Sr. Lee.
tms 1
Thomas
Proveedor gubernamental de Alemania
Contaminant Engineering•3 min read

PFAS Water Filtration Technologies Explained: Carbon, Resin & RO

Key Takeaway:

PFAS reduction depends on the specific compounds present, treatment media, contact time, water chemistry, and system design. Activated carbon, ion exchange, and Reverse Osmosis address PFAS through different mechanisms.

PFAS are a large family of persistent fluorinated compounds that can occur in drinking-water supplies. Their treatment behavior varies significantly by molecular structure, chain length, functional group, concentration, and the chemistry of the source water.

Granular Activated Carbon (GAC) removes PFAS primarily through adsorption. It is generally more effective for many longer-chain PFAS, while shorter-chain compounds tend to break through more quickly. Carbon performance depends on media properties, Empty Bed Contact Time (EBCT), competing organic matter, loading, and replacement frequency.

Ion-exchange resins use charged functional sites to capture many PFAS compounds. Properly selected anion-exchange media can provide high capacity and may perform better than conventional activated carbon for some shorter-chain PFAS, although performance still depends on water chemistry and competing ions.

Reverse Osmosis (RO) uses membrane separation rather than adsorption. Properly designed RO systems can provide broad reduction across many PFAS compounds as well as dissolved salts and other contaminants. Unlike carbon or resin, however, RO also produces a concentrate stream that must be managed.

No single technology should be selected from a PFAS label alone. System design should consider which PFAS compounds are present, their concentrations, required reduction targets, flow rate, media life, and the applicable third-party certification or validation requirements.

HisoAir Water Technical Series
Product Discovery•3 min read

How to Choose an Under-Sink Water Purifier for Modern Kitchens

Key Takeaway:

Match the treatment technology to your water quality first, then evaluate cabinet space, faucet configuration, flow rate, drain and power requirements, and filter replacement needs.

Choosing an under-sink water purifier starts with water chemistry. Carbon filtration is well suited to chlorine, taste, odor, and many organic contaminants, while Reverse Osmosis is more appropriate when dissolved salts, fluoride, nitrates, or broader dissolved contaminants need to be reduced.

For compact kitchens, tankless RO systems eliminate the conventional storage tank and can significantly reduce the space required under the sink. However, membrane capacity stated in GPD does not directly equal faucet flow. When comparing systems, check the actual dispensing flow rate, inlet-pressure requirement, recovery ratio, and whether a booster pump is required.

Installation architecture also matters. Many RO systems require a drain connection, electrical power, and either a dedicated drinking-water faucet or a compatible multi-function faucet. High-flow carbon systems can often connect directly to the existing cold-water line with a simpler installation, but pressure drop and available faucet flow should still be verified.

RO also removes much of the naturally occurring dissolved mineral content. Where taste or mineral balance is a priority, a post-RO remineralization stage can be added. Filter life should be evaluated by both rated capacity and local water quality rather than replacement time alone.

The right system is therefore not simply the smallest or highest-GPD model. It is the configuration that matches the target contaminants, available cabinet space, desired faucet setup, peak dispensing demand, and maintenance expectations.

HisoAir Water Technical Series
Water Quality•2 min read

What Does TDS Mean in Drinking Water? Measurement vs Contaminant Reality

Key Takeaway:

A TDS meter estimates the overall concentration of dissolved ionic substances from electrical conductivity. It cannot identify specific contaminants or determine whether water is chemically safe.

Total Dissolved Solids (TDS) refers to the combined concentration of dissolved substances in water. Most handheld TDS meters do not measure TDS directly. Instead, they measure electrical conductivity (EC) and convert that reading into an estimated parts-per-million (ppm) value.

This means a TDS reading can indicate how much dissolved ionic material is present, but not what that material actually is. Calcium, magnesium, sodium, nitrates, and other dissolved ions can all contribute to conductivity, yet a simple TDS meter cannot distinguish between them.

TDS meters are also not suitable for detecting trace contaminants such as PFAS, many VOCs, pesticides, pharmaceuticals, or disinfection byproducts. These substances may be present at concentrations far below the level needed to noticeably change electrical conductivity.

A low TDS reading therefore does not guarantee safe drinking water, and a higher TDS reading does not automatically indicate contamination. Water-treatment decisions should be based on laboratory testing for specific contaminants of concern rather than TDS alone.

HisoAir Water Technical Series
Technology Selection•2 min read

RO vs UF Water Filtration: Understanding Pore Sizes & Dissolved Minerals

Key Takeaway:

Ultrafiltration can reduce bacteria, turbidity, and suspended particles while retaining most naturally occurring dissolved minerals. Reverse Osmosis provides much broader reduction of dissolved salts and smaller contaminants.

Ultrafiltration (UF) typically uses hollow-fiber membranes with pore sizes in the approximate 0.01–0.1 micron range. These membranes physically retain turbidity, suspended solids, colloids, and many microorganisms while allowing dissolved minerals and salts to remain in the water.

Reverse Osmosis (RO) operates at a much finer separation level. Unlike UF, RO can substantially reduce dissolved ions such as sodium, calcium, fluoride, nitrates, and other contributors to total dissolved solids (TDS). This makes RO more suitable when dissolved-salt reduction is a primary treatment objective.

UF generally requires less system pressure and produces little or no continuous concentrate stream in many point-of-use configurations. RO typically requires greater pressure and produces a reject-water stream, but delivers broader contaminant reduction.

For water with acceptable TDS and mineral content, UF can be a simpler mineral-retaining treatment option. Where dissolved salts, fluoride, nitrates, or broader dissolved contaminants are a concern, RO is generally the more appropriate technology.

HisoAir Water Technical Series
Technology Selection•4 min read

Carbon Block vs Reverse Osmosis: Which Fits Your Need?

Key Takeaway:

Choose RO for dissolved inorganic salts and heavy metals; choose Carbon Block for chemical taste/odor, no wastewater, and high line-pressure flow.

Reverse Osmosis (RO) and Carbon Block filtration represent two fundamentally different treatment methods: membrane separation and adsorption. Understanding these differences helps determine which technology is better suited to a specific water-quality requirement.

Reverse Osmosis uses a semi-permeable membrane with pore sizes of approximately 0.0001 microns. It can significantly reduce dissolved inorganic contaminants such as TDS, fluoride, nitrates, and certain heavy metals. Because water must be forced through the membrane, RO systems require sufficient pressure or a booster pump and generate a concentrated wastewater stream.

Carbon Block filtration relies primarily on adsorption through compressed activated carbon, commonly with nominal pore sizes around 0.5–5 microns. It is highly effective for chlorine, chloramines, VOCs, taste, and odor, while allowing substantially higher direct-flow rates without producing wastewater.

From an operating perspective, Carbon Block systems are generally simpler, require less energy, and avoid the water loss associated with RO. RO involves higher system complexity and operating cost, but provides substantially broader reduction of dissolved contaminants that Carbon Block alone cannot address.

HisoAir Water Technical Series

SOLICITAR PRESUPUESTO