새 탭에서 열립니다
Air & Water Purification OEM/ODM Manufacturer | HisoAir

업계 인사이트

최신 게시물

사이드 테이블에 세련된 공기청정기가 놓인 현대적인 호텔 객실.

히소에어 공기청정 시스템은 호텔의 실내 공기질을 어떻게 개선하나요?

히소에어 공기 정화 시스템은 99.95%의 공기 중 입자를 포집하는 H13 트루 헤파 필터를 사용하여 호텔의 실내 공기질(IAQ)을 크게 개선합니다. 이 ...
뉴스
HEPA 필터와 활성탄 필터 나란히 배치

EPA의 업데이트된 가이드라인에 따르면 히스토에어 공기청정 시스템은 실내 공기질을 어떻게 개선하나요?

코로나19 팬데믹으로 인해 깨끗한 실내 공기를 확보하는 것이 중요해졌습니다. HisoAir 공기 정화 시스템은 고급 HEPA 필터와 스마트 센서를 활용하여 ...
뉴스
천장

히스토에어 천장형 공기청정기는 어떻게 HVAC 지속 가능성을 높이고 실내 공기질을 개선할 수 있을까요?

히스토에어 천장형 공기청정기는 에너지 효율을 최적화하고 실내 공기질을 개선하여 HVAC 시스템을 혁신합니다. 이 혁신적인 장치는 기존 시스템과 원활하게 통합되어 ...
뉴스
세련된 공기청정기와 대형 창문이 있는 현대적인 거실

미국의 주요 공기청정기 제조업체는 누구인가요?

이 블로그 게시물에서는 Intellipure 및 Oransi와 같은 브랜드를 중심으로 미국의 주요 공기청정기 제조업체를 살펴봅니다. 이 회사들은 전략적으로 제품을 조립합니다 ...
뉴스
IoT 기기와 공기청정기가 있는 현대적인 거실

IoT와 AI는 더 건강한 미래를 위해 실내 공기질을 어떻게 변화시키고 있나요?

IoT와 AI는 스마트 기기가 실시간으로 공기 상태를 모니터링, 분석 및 최적화하여 더 건강한 생활을 보장함으로써 실내 공기질 관리에 혁신을 일으키고 있습니다 ...
뉴스
공기 필터 제조 시설에서 첨단 기계를 작동하는 작업자

태국 최고의 에어 필터 제조업체는 어디인가요?

이 블로그 게시물에서는 태국 최고의 공기 필터 제조업체를 살펴보고 LESHA Thailand의 명성, 글로벌 무역 역학의 영향, 기술 발전 및 진화하는 ...
뉴스
밝은 제조 시설에서 공기 필터를 조립하는 작업자

베트남 최고의 에어 필터 제조업체는 어디인가요?

베트남은 무역 변화와 깨끗한 공기에 대한 수요에 힘입어 공기 필터 제조의 핵심 국가로 부상하고 있습니다. Viet Air와 같은 현지 기업들은 ...
뉴스
현대 실험실에서 알웬의 초상화

알웬이 공기 정화 및 환경 보호 분야의 전문가가 된 비결은 무엇인가요?

20년 이상의 경험을 가진 공기 정화 전문가 인 Alwen은 혁신적인 기술과 지속 가능한 관행을 결합하여 가정의 실내 공기질을 향상시킵니다.
뉴스
에어 필터를 조립하는 작업자가 있는 제조 시설

멕시코 최고의 에어 필터 제조업체는 어디인가요?

멕시코의 공기 필터 제조 산업은 곤헤르 데 멕시코와 같은 기업을 중심으로 빠르게 발전하고 있습니다. 미국 시장과의 근접성 및 변화하는 무역 ...
뉴스
정밀 도구를 갖춘 에어 필터 제조 시설

제조업체와 함께 에어 필터를 사용자 지정하는 데 얼마나 걸리나요?

공기 필터 맞춤 제작은 설계 복잡성, 재료 가용성, 주문 수량 및 제조업체 경험에 따라 영향을 받으며 일반적으로 2~4주가 소요됩니다. 효과적인 커뮤니케이션이 핵심입니다...
뉴스
사무실에서 다양한 팀이 맞춤형 필터 제조에 대해 논의하는 모습

신뢰할 수 있는 맞춤형 필터 제조업체를 찾는 가장 좋은 방법은 무엇인가요?

신뢰할 수 있는 맞춤형 필터 제조업체를 찾으려면 품질 보증, 커뮤니케이션, 사용자 지정 기능, 경험, 비용 대비 가치, 공급망 신뢰성 등을 평가해야 합니다. Google 및 Alibaba와 같은 플랫폼 ...
뉴스
이케아 직원용 공기청정기 (2)

IKEA 공기청정기는 어디에서 제조되나요?

IKEA의 FÖRNUFTIG 공기청정기는 주로 탄탄한 공급망과 숙련된 노동력으로 유명한 중국 푸젠성 샤먼시에서 생산됩니다. 이 회사는 ...
뉴스
Contaminant Engineering•3 min read

PFAS Water Filtration Technologies Explained: Carbon, Resin & RO

Key Takeaway:

PFAS reduction depends on the specific compounds present, treatment media, contact time, water chemistry, and system design. Activated carbon, ion exchange, and Reverse Osmosis address PFAS through different mechanisms.

PFAS are a large family of persistent fluorinated compounds that can occur in drinking-water supplies. Their treatment behavior varies significantly by molecular structure, chain length, functional group, concentration, and the chemistry of the source water.

Granular Activated Carbon (GAC) removes PFAS primarily through adsorption. It is generally more effective for many longer-chain PFAS, while shorter-chain compounds tend to break through more quickly. Carbon performance depends on media properties, Empty Bed Contact Time (EBCT), competing organic matter, loading, and replacement frequency.

Ion-exchange resins use charged functional sites to capture many PFAS compounds. Properly selected anion-exchange media can provide high capacity and may perform better than conventional activated carbon for some shorter-chain PFAS, although performance still depends on water chemistry and competing ions.

Reverse Osmosis (RO) uses membrane separation rather than adsorption. Properly designed RO systems can provide broad reduction across many PFAS compounds as well as dissolved salts and other contaminants. Unlike carbon or resin, however, RO also produces a concentrate stream that must be managed.

No single technology should be selected from a PFAS label alone. System design should consider which PFAS compounds are present, their concentrations, required reduction targets, flow rate, media life, and the applicable third-party certification or validation requirements.

HisoAir Water Technical Series
Product Discovery•3 min read

How to Choose an Under-Sink Water Purifier for Modern Kitchens

Key Takeaway:

Match the treatment technology to your water quality first, then evaluate cabinet space, faucet configuration, flow rate, drain and power requirements, and filter replacement needs.

Choosing an under-sink water purifier starts with water chemistry. Carbon filtration is well suited to chlorine, taste, odor, and many organic contaminants, while Reverse Osmosis is more appropriate when dissolved salts, fluoride, nitrates, or broader dissolved contaminants need to be reduced.

For compact kitchens, tankless RO systems eliminate the conventional storage tank and can significantly reduce the space required under the sink. However, membrane capacity stated in GPD does not directly equal faucet flow. When comparing systems, check the actual dispensing flow rate, inlet-pressure requirement, recovery ratio, and whether a booster pump is required.

Installation architecture also matters. Many RO systems require a drain connection, electrical power, and either a dedicated drinking-water faucet or a compatible multi-function faucet. High-flow carbon systems can often connect directly to the existing cold-water line with a simpler installation, but pressure drop and available faucet flow should still be verified.

RO also removes much of the naturally occurring dissolved mineral content. Where taste or mineral balance is a priority, a post-RO remineralization stage can be added. Filter life should be evaluated by both rated capacity and local water quality rather than replacement time alone.

The right system is therefore not simply the smallest or highest-GPD model. It is the configuration that matches the target contaminants, available cabinet space, desired faucet setup, peak dispensing demand, and maintenance expectations.

HisoAir Water Technical Series
Water Quality•2 min read

What Does TDS Mean in Drinking Water? Measurement vs Contaminant Reality

Key Takeaway:

A TDS meter estimates the overall concentration of dissolved ionic substances from electrical conductivity. It cannot identify specific contaminants or determine whether water is chemically safe.

Total Dissolved Solids (TDS) refers to the combined concentration of dissolved substances in water. Most handheld TDS meters do not measure TDS directly. Instead, they measure electrical conductivity (EC) and convert that reading into an estimated parts-per-million (ppm) value.

This means a TDS reading can indicate how much dissolved ionic material is present, but not what that material actually is. Calcium, magnesium, sodium, nitrates, and other dissolved ions can all contribute to conductivity, yet a simple TDS meter cannot distinguish between them.

TDS meters are also not suitable for detecting trace contaminants such as PFAS, many VOCs, pesticides, pharmaceuticals, or disinfection byproducts. These substances may be present at concentrations far below the level needed to noticeably change electrical conductivity.

A low TDS reading therefore does not guarantee safe drinking water, and a higher TDS reading does not automatically indicate contamination. Water-treatment decisions should be based on laboratory testing for specific contaminants of concern rather than TDS alone.

HisoAir Water Technical Series
Technology Selection•2 min read

RO vs UF Water Filtration: Understanding Pore Sizes & Dissolved Minerals

Key Takeaway:

Ultrafiltration can reduce bacteria, turbidity, and suspended particles while retaining most naturally occurring dissolved minerals. Reverse Osmosis provides much broader reduction of dissolved salts and smaller contaminants.

Ultrafiltration (UF) typically uses hollow-fiber membranes with pore sizes in the approximate 0.01–0.1 micron range. These membranes physically retain turbidity, suspended solids, colloids, and many microorganisms while allowing dissolved minerals and salts to remain in the water.

Reverse Osmosis (RO) operates at a much finer separation level. Unlike UF, RO can substantially reduce dissolved ions such as sodium, calcium, fluoride, nitrates, and other contributors to total dissolved solids (TDS). This makes RO more suitable when dissolved-salt reduction is a primary treatment objective.

UF generally requires less system pressure and produces little or no continuous concentrate stream in many point-of-use configurations. RO typically requires greater pressure and produces a reject-water stream, but delivers broader contaminant reduction.

For water with acceptable TDS and mineral content, UF can be a simpler mineral-retaining treatment option. Where dissolved salts, fluoride, nitrates, or broader dissolved contaminants are a concern, RO is generally the more appropriate technology.

HisoAir Water Technical Series
Technology Selection•4 min read

Carbon Block vs Reverse Osmosis: Which Fits Your Need?

Key Takeaway:

Choose RO for dissolved inorganic salts and heavy metals; choose Carbon Block for chemical taste/odor, no wastewater, and high line-pressure flow.

Reverse Osmosis (RO) and Carbon Block filtration represent two fundamentally different treatment methods: membrane separation and adsorption. Understanding these differences helps determine which technology is better suited to a specific water-quality requirement.

Reverse Osmosis uses a semi-permeable membrane with pore sizes of approximately 0.0001 microns. It can significantly reduce dissolved inorganic contaminants such as TDS, fluoride, nitrates, and certain heavy metals. Because water must be forced through the membrane, RO systems require sufficient pressure or a booster pump and generate a concentrated wastewater stream.

Carbon Block filtration relies primarily on adsorption through compressed activated carbon, commonly with nominal pore sizes around 0.5–5 microns. It is highly effective for chlorine, chloramines, VOCs, taste, and odor, while allowing substantially higher direct-flow rates without producing wastewater.

From an operating perspective, Carbon Block systems are generally simpler, require less energy, and avoid the water loss associated with RO. RO involves higher system complexity and operating cost, but provides substantially broader reduction of dissolved contaminants that Carbon Block alone cannot address.

HisoAir Water Technical Series

견적 요청하기