새 탭에서 열립니다
Air & Water Purification OEM/ODM Manufacturer | HisoAir
scale inhibitor filter hw f01

Scale Inhibitor Filter HW-F01

카테고리: Accessories

  • Inhibits scale build-up in water-using equipment

  • Protects metal components from corrosion

  • Extends the lifespan of pipelines and equipment

  • Preserves original pH levels with minimal impact on water quality

  • SGS Certified

견적 요청하기

제품 설명

The HW-F01 Scale Inhibitor Filter effectively prevents limescale build-up, protects pipelines and kitchen equipment from corrosion, and extends service life. Compact and easy to install, it delivers reliable protection without altering water taste or pH, making it ideal for commercial kitchens and water filtration systems.

사양

Inlet Water Pressure
0.1–0.4 MPa
치수
W315 × D176 × H133 mm
무게
1.7kg

관련 문서 다운로드

다운로드할 수 없습니다.

관련 문서 Scale Inhibitor Filter HW-F01

관련 기사가 없습니다.

Why Brands Choose HisoAir

Engineering Expertise. Flexible Manufacturing. Verified Performance.

20+ Years of Engineering Experience

Air treatment heritage and product engineering

OEM / ODM / JDM Expertise

From concept to production

Air & Water Filtration Engineering

HEPA, carbon, UF, RO and tailored systems

Product-Specific Performance Validation

Third-party testing and certification support

Flexible Product Customization

Design, function, filters, branding and packaging

Qualified Manufacturing Network

Product-matched production capabilities

Manufacturing Quality Management

Material controls and final product checks

Long-Term Technical Partnership

Ongoing engineering and product support

OEM/ODM Manufacturing & Engineering Partner for Air and Water Solutions

HisoAir supports global brands with product engineering, filtration technology, customization, and quality-managed manufacturing through qualified partners.

Filtration development concept illustration

Filtration R&D & Design

Media selection and filtration system engineering

Manufacturing illustration

정밀 제조

Assembly with manufacturing quality controls

Product testing illustration

Performance & Reliability Testing

Flow, pressure and leakage verification

Shipping and supply illustration

Scalable Production & Supply

Flexible planning for different market needs

Ready to Develop Your Next Air or Water Product?

Tell us your requirements, target market and project plan. Our team will review suitable options.

Contact Our Team

중국 3대 OEM/ODM 공기청정기 제조업체

수십 년 동안 브랜드 공기청정기를 위한 프라이빗 라벨링

히소에어는 히소에어의 공기청정기 디자인과 사양을 이미 검토하고 동의한 고객에게 개인 라벨링 공기청정기 서비스를 제공합니다. 계약이 체결되면 선택한 제품에 고객의 이름이 새겨진 라벨이 부착됩니다.

처음부터 끝까지 OEM 공기청정기

히소에어는 제품에 필요한 사양을 갖춘 파트너에게 OEM 공기청정기 서비스를 제공합니다. 히소에어는 고객의 최종 설계를 바탕으로 연구, 설계, 엔지니어링, 목업 또는 수정, 테스트 및 대량 생산을 제공합니다.

빨간색 3M 회사 로고.
이동 통신사 로고
하이얼 로고
알렌 로고 - 공기 정화 분야의 신뢰받는 기업
TCL 로고 0
하니웰 로고 - 공기 정화 및 여과 솔루션의 선두주자
LG 로고 - 스마트 가전 및 공기청정 솔루션의 혁신가
필립스 로고 - 건강 기술 및 공기 정화 솔루션의 선두주자

유명 글로벌 브랜드의 신뢰

20년 이상의 전문성을 바탕으로 전 세계에서 가장 인정받는 브랜드의 요구사항과 원활하게 통합되는 IAQ 솔루션을 전문적으로 제공합니다. 귀사의 시장에 맞는 탁월한 성능을 달성하기 위해 파트너와 함께하세요.

고객 후기

" 구글에서 Hisoair의 웹사이트를 찾았는데 솔직히 처음에는 신뢰할 수 있을지 확신이 없었지만 한 달 반 만에 제 프로젝트 요구 사항을 완료해 주었어요. 그리고 프로젝트에 CO2 센서를 긴급하게 추가해야 했을 때 일주일 만에 새 샘플을 완성해 주었기 때문에 제가 지금까지 함께 일했던 업체 중 가장 전문적이고 고객 중심적인 업체였습니다."
tms 1
Thomas
독일 정부 공급업체
" 우리 모두는 COVID가 전 세계, 특히 인도에 끔찍한 재앙이라는 것을 알고 있습니다. 저는 HisoAir에서 공기 청정기를 구입했습니다. 이것은 저와 제 사무실, 집, 가족 및 친구들에게 매우 유용했습니다. 저는 지난 7 년 동안 HisoAir 출신 인 Alwen과 함께 일해 왔으며 그가 매우 신뢰할 수있는 사람이고 매우 효율적이며 매우 전문적이라는 것을 알 수 있습니다."
고객 후기 2
란지트 발라
인도에서 의료 제품 수입업체
" 우리는 15년 이상 민간 기관 및 민간 부문과 협력한 경험이 있는 회사로, 히소와 3년 동안 협력해 왔으며 히소가 우리에게 제공한 작업에 대해 정말 감사하게 생각합니다. 히소와의 협업에 감사드립니다. 체리와 이씨 "
고객 후기
헤리나
루마니아의 병원 및 정부 공급업체

공기 여과 솔루션에 대한 전문성을 바탕으로 글로벌 리더들과 함께하세요.

귀하의 문의는 매우 중요합니다. 곧 연결해 드리며, 회원님의 정보는 항상 안전하게 보호됩니다.
히소와 3년 동안 협업을 해왔고, 히소가 우리에게 제공한 작품에 대해 정말 감사하게 생각합니다. 체리 씨와 이 씨와의 협업에 감사드립니다.
tms 1
Thomas
독일 정부 공급업체
Contaminant Engineering•3 min read

PFAS Water Filtration Technologies Explained: Carbon, Resin & RO

Key Takeaway:

PFAS reduction depends on the specific compounds present, treatment media, contact time, water chemistry, and system design. Activated carbon, ion exchange, and Reverse Osmosis address PFAS through different mechanisms.

PFAS are a large family of persistent fluorinated compounds that can occur in drinking-water supplies. Their treatment behavior varies significantly by molecular structure, chain length, functional group, concentration, and the chemistry of the source water.

Granular Activated Carbon (GAC) removes PFAS primarily through adsorption. It is generally more effective for many longer-chain PFAS, while shorter-chain compounds tend to break through more quickly. Carbon performance depends on media properties, Empty Bed Contact Time (EBCT), competing organic matter, loading, and replacement frequency.

Ion-exchange resins use charged functional sites to capture many PFAS compounds. Properly selected anion-exchange media can provide high capacity and may perform better than conventional activated carbon for some shorter-chain PFAS, although performance still depends on water chemistry and competing ions.

Reverse Osmosis (RO) uses membrane separation rather than adsorption. Properly designed RO systems can provide broad reduction across many PFAS compounds as well as dissolved salts and other contaminants. Unlike carbon or resin, however, RO also produces a concentrate stream that must be managed.

No single technology should be selected from a PFAS label alone. System design should consider which PFAS compounds are present, their concentrations, required reduction targets, flow rate, media life, and the applicable third-party certification or validation requirements.

HisoAir Water Technical Series
Product Discovery•3 min read

How to Choose an Under-Sink Water Purifier for Modern Kitchens

Key Takeaway:

Match the treatment technology to your water quality first, then evaluate cabinet space, faucet configuration, flow rate, drain and power requirements, and filter replacement needs.

Choosing an under-sink water purifier starts with water chemistry. Carbon filtration is well suited to chlorine, taste, odor, and many organic contaminants, while Reverse Osmosis is more appropriate when dissolved salts, fluoride, nitrates, or broader dissolved contaminants need to be reduced.

For compact kitchens, tankless RO systems eliminate the conventional storage tank and can significantly reduce the space required under the sink. However, membrane capacity stated in GPD does not directly equal faucet flow. When comparing systems, check the actual dispensing flow rate, inlet-pressure requirement, recovery ratio, and whether a booster pump is required.

Installation architecture also matters. Many RO systems require a drain connection, electrical power, and either a dedicated drinking-water faucet or a compatible multi-function faucet. High-flow carbon systems can often connect directly to the existing cold-water line with a simpler installation, but pressure drop and available faucet flow should still be verified.

RO also removes much of the naturally occurring dissolved mineral content. Where taste or mineral balance is a priority, a post-RO remineralization stage can be added. Filter life should be evaluated by both rated capacity and local water quality rather than replacement time alone.

The right system is therefore not simply the smallest or highest-GPD model. It is the configuration that matches the target contaminants, available cabinet space, desired faucet setup, peak dispensing demand, and maintenance expectations.

HisoAir Water Technical Series
Water Quality•2 min read

What Does TDS Mean in Drinking Water? Measurement vs Contaminant Reality

Key Takeaway:

A TDS meter estimates the overall concentration of dissolved ionic substances from electrical conductivity. It cannot identify specific contaminants or determine whether water is chemically safe.

Total Dissolved Solids (TDS) refers to the combined concentration of dissolved substances in water. Most handheld TDS meters do not measure TDS directly. Instead, they measure electrical conductivity (EC) and convert that reading into an estimated parts-per-million (ppm) value.

This means a TDS reading can indicate how much dissolved ionic material is present, but not what that material actually is. Calcium, magnesium, sodium, nitrates, and other dissolved ions can all contribute to conductivity, yet a simple TDS meter cannot distinguish between them.

TDS meters are also not suitable for detecting trace contaminants such as PFAS, many VOCs, pesticides, pharmaceuticals, or disinfection byproducts. These substances may be present at concentrations far below the level needed to noticeably change electrical conductivity.

A low TDS reading therefore does not guarantee safe drinking water, and a higher TDS reading does not automatically indicate contamination. Water-treatment decisions should be based on laboratory testing for specific contaminants of concern rather than TDS alone.

HisoAir Water Technical Series
Technology Selection•2 min read

RO vs UF Water Filtration: Understanding Pore Sizes & Dissolved Minerals

Key Takeaway:

Ultrafiltration can reduce bacteria, turbidity, and suspended particles while retaining most naturally occurring dissolved minerals. Reverse Osmosis provides much broader reduction of dissolved salts and smaller contaminants.

Ultrafiltration (UF) typically uses hollow-fiber membranes with pore sizes in the approximate 0.01–0.1 micron range. These membranes physically retain turbidity, suspended solids, colloids, and many microorganisms while allowing dissolved minerals and salts to remain in the water.

Reverse Osmosis (RO) operates at a much finer separation level. Unlike UF, RO can substantially reduce dissolved ions such as sodium, calcium, fluoride, nitrates, and other contributors to total dissolved solids (TDS). This makes RO more suitable when dissolved-salt reduction is a primary treatment objective.

UF generally requires less system pressure and produces little or no continuous concentrate stream in many point-of-use configurations. RO typically requires greater pressure and produces a reject-water stream, but delivers broader contaminant reduction.

For water with acceptable TDS and mineral content, UF can be a simpler mineral-retaining treatment option. Where dissolved salts, fluoride, nitrates, or broader dissolved contaminants are a concern, RO is generally the more appropriate technology.

HisoAir Water Technical Series
Technology Selection•4 min read

Carbon Block vs Reverse Osmosis: Which Fits Your Need?

Key Takeaway:

Choose RO for dissolved inorganic salts and heavy metals; choose Carbon Block for chemical taste/odor, no wastewater, and high line-pressure flow.

Reverse Osmosis (RO) and Carbon Block filtration represent two fundamentally different treatment methods: membrane separation and adsorption. Understanding these differences helps determine which technology is better suited to a specific water-quality requirement.

Reverse Osmosis uses a semi-permeable membrane with pore sizes of approximately 0.0001 microns. It can significantly reduce dissolved inorganic contaminants such as TDS, fluoride, nitrates, and certain heavy metals. Because water must be forced through the membrane, RO systems require sufficient pressure or a booster pump and generate a concentrated wastewater stream.

Carbon Block filtration relies primarily on adsorption through compressed activated carbon, commonly with nominal pore sizes around 0.5–5 microns. It is highly effective for chlorine, chloramines, VOCs, taste, and odor, while allowing substantially higher direct-flow rates without producing wastewater.

From an operating perspective, Carbon Block systems are generally simpler, require less energy, and avoid the water loss associated with RO. RO involves higher system complexity and operating cost, but provides substantially broader reduction of dissolved contaminants that Carbon Block alone cannot address.

HisoAir Water Technical Series

견적 요청하기