OEM Water Purifier Manufacturer for
20+ Years
<4 ppt
100+
3 Countries
Water Purification Platforms Built for Brand Launches
We provide more than single product sourcing. Our platforms enable rapid private labeling, light platform customization, full ODM development, and reliable replacement filter recurring revenue models.
Countertop Instant-Hot RO Platform
Under-Sink Cold & Sparkling Water Platform
HW-S6 Twist-Lock Under-Sink Filtration Platform
Custom Replacement Filter & PFAS Program
Compare Available Platforms
Countertop Water Purifier Platform
Under-Sink RO Platform 400–800 GPD
High-Flow RO Platform 1200–1600 GPD
Replacement Filter & PFAS-Ready Media Platform
One Certified Filter Platform, Multiple System Configurations
Eliminate redundant tooling and redevelopment time. Our platform utilizes a shared filter-head architecture, allowing you to adapt the exact same Twist-Lock S6 cartridge into single, series, or parallel configurations depending on project constraints.
Pre-Mounted Single Filter
Series Connection
Parallel Connection
Utilizing the same certified cartridge in a series or parallel configuration does not automatically extend the certification listing to the new system. Final validation is always required.
Premium Under-Sink Cold and Sparkling Water Platform
Combine robust filtration with integrated compressor cooling and carbonation. Designed for modern kitchens and office pantries requiring high-end beverage delivery from a single smart faucet.
Values shown are based on the current 230V / 50Hz engineering specification. Performance may vary with ambient temperature, inlet-water temperature, pressure and final configuration.
What Does PFAS-Ready Actually Mean?
A PFAS-ready water purifier is not automatically PFAS-certified. It is a system whose media selection, contact time, flow path, cartridge capacity and testing plan have been configured around defined PFAS reduction targets.
PFAS-Ready
Media, flow path, contact time and cartridge capacity are configured according to PFAS reduction engineering targets.
Third-Party Tested
Specific system and cartridge combinations have completed independent testing with defined conditions and available reports.
Certified for PFAS Reduction
Exact model and cartridge configuration appear on the official listing of an accredited certification body.
Certification applies only to the exact system, cartridge and configuration identified in the official listing.
Technical references: U.S. EPA drinking-water regulations, applicable NSF standards and certification-body product listings.
What Can Be Verified for the Current S6 Configuration?
Certification applies only to the exact product model, filter cartridge, flow configuration and performance claims identified in the official listing. Series, parallel or customized configurations may require additional evaluation.
What PFAS-Ready Does Not Mean
PFAS-ready does not mean that every configuration is already certified. Final claims depend on the exact media, system flow rate, cartridge capacity, test conditions and certification status. Active certification requires ongoing compliance.
Variables Affecting Certification
Changing a faucet, modifying the flow rate, or altering the cartridge dimensions can invalidate an existing certification. We design our platforms to provide predictable performance, guiding you through the compliance implications of your customization choices.
The Master Listing Advantage
When utilizing components or systems that hold a Master Listing, the pathway to your own private-label certification is significantly streamlined.
Choose the Right PFAS Filtration Route
There is no single "best" media. The optimal technology depends on your target form factor, flow rate requirements, and certification strategy. We configure these technologies based on realistic performance metrics, not generic marketing claims.
Granular Activated Carbon
Carbon Block
ACF (Activated Carbon Fiber)
Reverse Osmosis
Water Purifier Certification and Listing Pathway
Navigating water filtration certification requires precision. We support brands through the entire pathway—from initial BOM formulation to final listing coordination—ensuring structural integrity, material safety, and performance claims are backed by rigorous protocols.
Target Market & Claim Definition
HisoAir reviews the target contaminant claims, intended market standards, and product form factor.
Listing & Component Review
Evaluate existing Master Listings and certified components to minimize redundant testing.
System & Cartridge Config
Define the BOM, system structure, filter media, and contact materials for the prototype.
Prototype & Pre-Testing
Prepare technical files, drawings, and physical samples for internal pre-compliance testing.
Submission & Production
Coordinate with NSF/WQA/IAPMO for formal testing and establish production quality controls.
Certification Status Matrix
RO membrane
Carbon media
Complete system
PFAS reduction claim
Testing Evidence
Data drives confidence. We validate our platform capabilities through rigorous internal protocols and recognized third-party laboratories. Reports are provided with clear testing conditions, inlet parameters, and defined lifespans.
NSF 42/53/401/372 certification
Total PFAS claim
1.5 GPM flow
3,000-gallon capacity
30–150 psi feed pressure
Cold water 3°C & Cooling 1 G/h
Reports provided to OEM clients include specific test dates, sample configurations, precise inlet water conditions (TDS, pressure, temperature), defined flow rates, and the limits of detection utilized by the laboratory.
OEM Customization Levels
We adapt our engagement model to match your go-to-market strategy, balancing speed, investment, and uniqueness.
Private Label
Fast market entry for established channels.
Existing products, logo application, custom packaging, manuals, and custom filter labels.
Minimal. Leverages existing listings (if applicable). Changing product color or packaging normally has limited certification impact.
Brand assets, packaging design, and target volume.
Platform Customization
Differentiated features on proven architectures.
Filtration routing, filter combinations, specific faucets, color CMF, UI tweaks, flow adjustments, and basic sensors.
Moderate. Changes to flow path, media, or faucet may require partial re-testing or addendum.
Feature requirements, desired filtration route, and performance specs.
Full ODM Development
Unique proprietary systems and smart home integration.
Custom structural design, exclusive tooling, electronic control boards, companion Apps, IoT (Matter/Tuya) integration.
High. Requires full independent certification project from the ground up.
Industrial design concepts, technical specifications, and IoT requirements.
Not sure which development level fits your project?
Compare customization scope, certification impact and expected project inputs.
Certification Warning: Changes to filter media, flow rate, wetted materials, water path or system configuration may affect existing certification coverage and require additional evaluation.
North American Water Distributor Evaluation Program
Wholesaler, installer, and private-label brand network.
S6 Under-Sink Platform addressing PFAS and general drinking-water concerns.
Product platform selection, certification documentation, sample preparation, and filter-replacement business model planning.
The project has progressed to product evaluation and market validation.
Why Choose Hiso
private label launches, and PFAS-ready product development.
20+ Years Manufacturing
UF / RO / Carbon Block
Private Label / OEM/ODM
China + N Manufacturing
Replacement Filter / Platform Support
Certification Support
Experience construction done right
Competitive Pricing
Factory-direct production, stable raw materials, and MOQ flexibility mean you get better value—without quality trade-offs.
Certified Safety
All filters meet global safety standards including NSF, ISO, RoHS & SGS—ready for export and trusted by OEMs worldwide.
Eco-Friendly Materials
100% coconut shell carbon, recyclable shells, and zero metal contamination—designed for clean water and a cleaner planet.
Fabrico de precisão
Automated production and strict QC ensure stable dimensions and performance across every batch.
What We Serve?
Distributors & Traders
Component Assemblers
ODM Clients
Partner with 20+ Years of Excellence
NSF/ANSI 42, 53 & 58 oriented design
Customized UI/UX & Smart Displays
Advanced Production in 3 Countries
Strict 5-Step Quality Assurance
Our Factory — Our Production Environment
Advanced Manufacturing Line
Multi-Lab Testing Center
Core Component Validation
Certified & Protected Technology
Our Partners
Insights & Resources
Deepen your understanding of certification pathways, media technologies, and manufacturing strategies to build a successful water purification portfolio.
What Is an NSF Master Listing?
PFAS-Ready vs PFAS-Certified: Engineering Differences
Carbon Block vs ACF for Target Contaminants
Perguntas mais frequentes
Technical insights for OEM product planning.
What is the difference between PFAS-ready and PFAS-certified?
“Ready” implies the system is engineered with the correct media, contact time, and flow characteristics required to target PFAS. “Certified” means that exact configuration has passed official testing (e.g., NSF/ANSI 53) and holds an active public listing from an accredited body.
Which NSF standard applies to PFAS water filters?
NSF/ANSI 53 (Health Effects) is typically used for point-of-use systems reducing specific PFAS compounds in drinking water. NSF/ANSI 58 covers Reverse Osmosis systems which also effectively reduce broad spectra of contaminants.
Can an existing NSF-listed cartridge be used in a private-label system?
Yes. Utilizing an existing Master Listed cartridge can significantly streamline the certification process for your private-label system, provided the system housing and flow dynamics do not alter the cartridge performance.
Does changing the faucet or flow rate affect certification?
Yes. Modifications to the faucet, tubing, or flow restrictors can change the contact time of water with the filtration media, which may invalidate existing performance certifications and require re-testing.
Which is better for PFAS: carbon block, ACF or reverse osmosis?
There is no absolute “best.” Carbon block and ACF are effective for targeted adsorption in compact footprints. RO provides broad-spectrum reduction but requires pressure and generates wastewater. The choice depends on your specific product goals and market constraints.
Can HisoAir support a complete NSF certification project?
Yes, we provide end-to-end support for certification projects, including BOM preparation, sample coordination, and direct communication with testing laboratories to ensure compliance.
What information is required to recommend a filtration platform?
To recommend the optimal platform, we need to know your target contaminant claims, desired flow rate, form factor (countertop, under-sink), intended market, and whether you require smart/electronic features.
Can the system be manufactured outside China?
We offer flexible China+1 manufacturing strategies, with established supply chain and assembly options in regions like Thailand and Vietnam to support global distribution and mitigate risk.
What can be customized without opening new molds?
Through our Platform Customization level, you can modify colors (CMF), UI elements, select different standard faucets, configure filter media combinations, and apply custom branding without incurring the cost of new tooling.
How are replacement filters and recurring revenue programs developed?
We design systems with proprietary or specific form-factor cartridges, ensuring end-users return to your brand for replacements. We also assist in structuring the supply chain for reliable, long-term filter availability.
SOLICITAR UM ORÇAMENTO
enviar uma mensagem abaixo
Entraremos em contacto consigo o mais rapidamente possível!
MANTER-SE EM CONTACTO
Informações de contacto
Estabeleceremos uma ligação em breve e os seus dados permanecerão sempre seguros.
Escritório nos EUA: 2180 S WINEVILLE AVE ONTARIO, CA 91761
Escritório: Room 712~713, Building 1, No. 4, Second Road, Songshan Lake Park, Dongguan City, Guangdong Province, 523429.
Fábrica: China | Vietname | Tailândia | Malásia
English 
Français 
Español 
Italiano 
Deutsch 
Português 
Русский 
العربية 
日本語 
한국어 
Tiếng Việt