Öffnet in einem neuen Tab
Innovative Lösungen für die Luftqualität

Nachrichten

lg luftreiniger (8)

Wo werden die LG Luftreiniger hergestellt?

In diesem Blog-Beitrag wird die Herkunft der LG-Luftreiniger untersucht. Dabei wird deutlich, dass die meisten Premium-Modelle in Südkorea hergestellt werden, während die kostengünstigeren Varianten ...
2024-11-24
Nachrichten
samsung luftreiniger (3)

Wo werden die Luftreiniger von Samsung hergestellt?

Samsung-Luftreiniger werden hauptsächlich in China hergestellt, und zwar in Foshan City in der Provinz Guangdong. Ausschlaggebend für diese Entscheidung sind die Kosteneffizienz und der Zugang zu ...
2024-11-24
Nachrichten
Vergleich zwischen bipolarer Ionisierung und HEPA-Luftreinigern

Bipolare Ionisierung vs. HEPA-Luftreiniger: Was ist effektiver?

Die Wahl zwischen bipolarer Ionisierung und HEPA-Luftreinigern kann schwierig sein. HEPA-Filter fangen 99,97% der in der Luft befindlichen Partikel ab und sind damit eine zuverlässige Wahl zur Verbesserung der ...
2024-11-24
Nachrichten
Ein moderner Innenraum mit drei Luftreinigern.

Ionisator vs. UV vs. HEPA-Luftreiniger: Was ist das Beste für Sie?

Die Wahl des richtigen Luftreinigers kann verwirrend sein. HEPA-Filter sind hocheffektiv und halten 99,97% der in der Luft befindlichen Partikel wie Allergene, Staub und Bakterien zurück. Im Gegensatz dazu ...
2024-11-24
Nachrichten
Hai-Luftreiniger

Wo werden die Shark Luftreiniger hergestellt?

Shark-Luftreiniger werden hauptsächlich in China und Vietnam hergestellt, wobei fortschrittliche Fertigungstechniken und qualifizierte Arbeitskräfte eingesetzt werden, um hohe Qualität zu wettbewerbsfähigen Preisen zu gewährleisten. Dies ...
2024-11-22
Nachrichten
coway luftreiniger (3)

Wo werden die Coway-Luftreiniger hergestellt?

Coway, eine koreanische Marke, die für ihre Luftreiniger bekannt ist, stellt ihre Produkte hauptsächlich in Guangzhou, China, her. Diese strategische Entscheidung ermöglicht es Coway, von Chinas ...
2024-11-22
Nachrichten
winix luftreiniger (2)

Wo werden die Winix-Luftreiniger hergestellt?

Winix-Luftreiniger werden hauptsächlich in Südkorea hergestellt, wo qualifizierte Arbeitskräfte und fortschrittliche Technologie zu ihrer hohen Qualität beitragen. Das Unternehmen profitiert von ...
2024-11-22
Nachrichten
levoit luftreiniger raumgröße homepage

Wo werden die Levoit-Luftreiniger hergestellt?

Die Luftreiniger von Levoit werden überwiegend in China hergestellt, insbesondere in den Provinzen Fujian, Guangdong und Zhejiang. Diese strategische Produktionswahl unterstützt ihre starke Marktposition ...
2024-11-22
Nachrichten
home cover blueair luftreiniger

Wo werden die BlueAir-Luftreiniger hergestellt?

BlueAir-Luftreiniger werden hauptsächlich in Foshan, China, hergestellt und nutzen eine robuste Lieferkette, zu der auch Lieferanten aus Shenzhen und Dongguan gehören. Nach der Übernahme durch Unilever wird BlueAir ...
2024-11-22
Nachrichten
Blueair-Allergien

Warum sind die BlueAir-Luftreiniger so teuer?

BlueAir-Luftreiniger sind für ihre hohen Preise bekannt, was auf ihre innovative HEPASilent-Technologie zurückzuführen ist, die mechanische Filterung mit elektrostatischer Aufladung für effiziente ...
2024-11-22
Nachrichten
Ein modernes Wohnzimmer, in dem ein eleganter Luftreiniger inmitten von modernen Möbeln und Pflanzen steht.

Warum sind CARB-zertifizierte Luftreiniger für die Einhaltung der Innenraumluftqualitätsstandards unerlässlich?

CARB-zertifizierte Luftreiniger sind für die Aufrechterhaltung einer sicheren Raumluftqualität unerlässlich. Sie erfüllen die strengen Emissionsnormen des California Air Resources Board und tragen damit erheblich ...
2024-11-21
Nachrichten
Decke

Was sind die besten Luftreiniger für einen Nagelsalon?

Nagelstudios stehen aufgrund von Staub und chemischen Dämpfen aus Nagelprodukten vor besonderen Herausforderungen hinsichtlich der Luftqualität. Herkömmliche Luftreiniger für den Wohnbereich reichen oft nicht aus, um die ...
2024-11-21
Air purifier, News
Contaminant Engineering•3 min read

PFAS Water Filtration Technologies Explained: Carbon, Resin & RO

Key Takeaway:

PFAS reduction depends on the specific compounds present, treatment media, contact time, water chemistry, and system design. Activated carbon, ion exchange, and Reverse Osmosis address PFAS through different mechanisms.

PFAS are a large family of persistent fluorinated compounds that can occur in drinking-water supplies. Their treatment behavior varies significantly by molecular structure, chain length, functional group, concentration, and the chemistry of the source water.

Granular Activated Carbon (GAC) removes PFAS primarily through adsorption. It is generally more effective for many longer-chain PFAS, while shorter-chain compounds tend to break through more quickly. Carbon performance depends on media properties, Empty Bed Contact Time (EBCT), competing organic matter, loading, and replacement frequency.

Ion-exchange resins use charged functional sites to capture many PFAS compounds. Properly selected anion-exchange media can provide high capacity and may perform better than conventional activated carbon for some shorter-chain PFAS, although performance still depends on water chemistry and competing ions.

Reverse Osmosis (RO) uses membrane separation rather than adsorption. Properly designed RO systems can provide broad reduction across many PFAS compounds as well as dissolved salts and other contaminants. Unlike carbon or resin, however, RO also produces a concentrate stream that must be managed.

No single technology should be selected from a PFAS label alone. System design should consider which PFAS compounds are present, their concentrations, required reduction targets, flow rate, media life, and the applicable third-party certification or validation requirements.

HisoAir Water Technical Series
Product Discovery•3 min read

How to Choose an Under-Sink Water Purifier for Modern Kitchens

Key Takeaway:

Match the treatment technology to your water quality first, then evaluate cabinet space, faucet configuration, flow rate, drain and power requirements, and filter replacement needs.

Choosing an under-sink water purifier starts with water chemistry. Carbon filtration is well suited to chlorine, taste, odor, and many organic contaminants, while Reverse Osmosis is more appropriate when dissolved salts, fluoride, nitrates, or broader dissolved contaminants need to be reduced.

For compact kitchens, tankless RO systems eliminate the conventional storage tank and can significantly reduce the space required under the sink. However, membrane capacity stated in GPD does not directly equal faucet flow. When comparing systems, check the actual dispensing flow rate, inlet-pressure requirement, recovery ratio, and whether a booster pump is required.

Installation architecture also matters. Many RO systems require a drain connection, electrical power, and either a dedicated drinking-water faucet or a compatible multi-function faucet. High-flow carbon systems can often connect directly to the existing cold-water line with a simpler installation, but pressure drop and available faucet flow should still be verified.

RO also removes much of the naturally occurring dissolved mineral content. Where taste or mineral balance is a priority, a post-RO remineralization stage can be added. Filter life should be evaluated by both rated capacity and local water quality rather than replacement time alone.

The right system is therefore not simply the smallest or highest-GPD model. It is the configuration that matches the target contaminants, available cabinet space, desired faucet setup, peak dispensing demand, and maintenance expectations.

HisoAir Water Technical Series
Water Quality•2 min read

What Does TDS Mean in Drinking Water? Measurement vs Contaminant Reality

Key Takeaway:

A TDS meter estimates the overall concentration of dissolved ionic substances from electrical conductivity. It cannot identify specific contaminants or determine whether water is chemically safe.

Total Dissolved Solids (TDS) refers to the combined concentration of dissolved substances in water. Most handheld TDS meters do not measure TDS directly. Instead, they measure electrical conductivity (EC) and convert that reading into an estimated parts-per-million (ppm) value.

This means a TDS reading can indicate how much dissolved ionic material is present, but not what that material actually is. Calcium, magnesium, sodium, nitrates, and other dissolved ions can all contribute to conductivity, yet a simple TDS meter cannot distinguish between them.

TDS meters are also not suitable for detecting trace contaminants such as PFAS, many VOCs, pesticides, pharmaceuticals, or disinfection byproducts. These substances may be present at concentrations far below the level needed to noticeably change electrical conductivity.

A low TDS reading therefore does not guarantee safe drinking water, and a higher TDS reading does not automatically indicate contamination. Water-treatment decisions should be based on laboratory testing for specific contaminants of concern rather than TDS alone.

HisoAir Water Technical Series
Technology Selection•2 min read

RO vs UF Water Filtration: Understanding Pore Sizes & Dissolved Minerals

Key Takeaway:

Ultrafiltration can reduce bacteria, turbidity, and suspended particles while retaining most naturally occurring dissolved minerals. Reverse Osmosis provides much broader reduction of dissolved salts and smaller contaminants.

Ultrafiltration (UF) typically uses hollow-fiber membranes with pore sizes in the approximate 0.01–0.1 micron range. These membranes physically retain turbidity, suspended solids, colloids, and many microorganisms while allowing dissolved minerals and salts to remain in the water.

Reverse Osmosis (RO) operates at a much finer separation level. Unlike UF, RO can substantially reduce dissolved ions such as sodium, calcium, fluoride, nitrates, and other contributors to total dissolved solids (TDS). This makes RO more suitable when dissolved-salt reduction is a primary treatment objective.

UF generally requires less system pressure and produces little or no continuous concentrate stream in many point-of-use configurations. RO typically requires greater pressure and produces a reject-water stream, but delivers broader contaminant reduction.

For water with acceptable TDS and mineral content, UF can be a simpler mineral-retaining treatment option. Where dissolved salts, fluoride, nitrates, or broader dissolved contaminants are a concern, RO is generally the more appropriate technology.

HisoAir Water Technical Series
Technology Selection•4 min read

Carbon Block vs Reverse Osmosis: Which Fits Your Need?

Key Takeaway:

Choose RO for dissolved inorganic salts and heavy metals; choose Carbon Block for chemical taste/odor, no wastewater, and high line-pressure flow.

Reverse Osmosis (RO) and Carbon Block filtration represent two fundamentally different treatment methods: membrane separation and adsorption. Understanding these differences helps determine which technology is better suited to a specific water-quality requirement.

Reverse Osmosis uses a semi-permeable membrane with pore sizes of approximately 0.0001 microns. It can significantly reduce dissolved inorganic contaminants such as TDS, fluoride, nitrates, and certain heavy metals. Because water must be forced through the membrane, RO systems require sufficient pressure or a booster pump and generate a concentrated wastewater stream.

Carbon Block filtration relies primarily on adsorption through compressed activated carbon, commonly with nominal pore sizes around 0.5–5 microns. It is highly effective for chlorine, chloramines, VOCs, taste, and odor, while allowing substantially higher direct-flow rates without producing wastewater.

From an operating perspective, Carbon Block systems are generally simpler, require less energy, and avoid the water loss associated with RO. RO involves higher system complexity and operating cost, but provides substantially broader reduction of dissolved contaminants that Carbon Block alone cannot address.

HisoAir Water Technical Series

EIN ANGEBOT ANFORDERN