S’ouvre dans un nouvel onglet
Solutions innovantes pour la qualité de l'air

Aperçus de l'industrie

Derniers messages

Guide d'achat des stérilisateurs à air

Guide d'achat des stérilisateurs à air

Qu'est-ce qui fait qu'un stérilisateur à air fin est adapté à l'élimination des maladies transmises par l'air ? Ce guide vous indiquera exactement quel modèle, quelle taille et quel prix vous devriez ...
2021-05-04
Air purifier, News
Vary the Speed Settings According to the Time of the Year

Combien de temps faut-il faire fonctionner un purificateur d'air ?

L'idéal est de faire fonctionner votre purificateur d'air 24 heures sur 24 et 7 jours sur 7. Une pièce peut être recontaminée en l'espace de 2 à 4 heures si vous le laissez éteint. Mais combien de temps doit-on ...
2021-04-23
Air purifier, News
Quels sont les meilleurs endroits pour placer un purificateur d'air ?

Quels sont les meilleurs endroits pour placer un purificateur d'air ?

L'emplacement correct des purificateurs d'air améliore considérablement leur capacité à éliminer les polluants en suspension dans l'air. Mais où faut-il vraiment les placer ? Quels sont les éléments ...
2021-04-23
Air purifier, News
Comment utiliser un purificateur d'air ? 6 moyens efficaces et faciles pour purifier l'air

Comment utiliser un purificateur d'air ? 6 moyens efficaces et faciles pour purifier l'air

Ne savez-vous pas qu'il est encore possible d'optimiser les performances de votre purificateur d'air, qui est déjà très performant ? Lisez la suite pour savoir comment faire ! Un purificateur d'air ...
2021-04-21
Air purifier, News
Comment fonctionne un purificateur d'air ? Tout ce qu'il faut savoir

Comment fonctionne un purificateur d'air ? Tout ce qu'il faut savoir

Vous voulez savoir comment fonctionne un purificateur d'air avant d'en acheter un ? Son fonctionnement est assez simple. Il suffit de regarder ce schéma simple : Un purificateur d'air ...
2021-04-21
Air purifier, News
Ai-je besoin d'un purificateur d'air ?

Ai-je besoin d'un purificateur d'air ? Les purificateurs d'air sont-ils une perte d'argent ?

Que vous souhaitiez un air plus pur, plus sûr et plus respirable, ou que vous vouliez vous débarrasser des poussières, des germes en suspension et des virus, les purificateurs d'air peuvent vous aider. Avez-vous vraiment besoin d'un ...
2021-04-13
Air purifier, News
9 meilleurs purificateurs d'air silencieux Ninja pour l'industrie

9 meilleurs purificateurs d'air silencieux Ninja pour l'industrie

2021-04-13
Actualités
Les lampes au sel de l'Himalaya purifient-elles vraiment l'air ?

Les lampes au sel de l'Himalaya purifient-elles vraiment l'air ?

Les lampes de sel de l'Himalaya NE purifient PAS l'air intérieur - ce sont les purificateurs d'air qui le font. Dans cet article, nous expliquerons pourquoi vous ne devez pas faire confiance aux systèmes de ...
2021-04-08
Air purifier, News
Les purificateurs d'air éliminent-ils les virus ? La vérité sur COVID

Les purificateurs d'air éliminent-ils les virus ? La vérité sur COVID

2021-04-07
Air purifier, News
blue tinted house interior fully ventilated

9 meilleurs purificateurs d'air pour grandes pièces - filtre HEPA, lumière UV

As an Air Purifier Manufacturer , we'll tell you exactly which air purifier you need for your large spaces.  Source: Molekule Blog We've laid out ...
2021-04-07
Air purifier, News
purificateur d'air dans la chambre à coucher

Top 12 World-Class Air Purifier Brands (2026) HEPA

Vous avez du mal à choisir la bonne marque de purificateur d'air pour votre entreprise ou votre maison ? Découvrez notre examen honnête des meilleurs purificateurs d'air HEPA ...
2021-04-05
Fabricants de purificateurs d'air, Nouvelles
5 meilleurs fabricants de purificateurs d'air en Inde (2021) - HisoAir

5 Best Air Purifier Manufacturers in India (2026) – HisoAir

Si vous recherchez les meilleurs fabricants de purificateurs d'air en Inde, vous êtes sur la bonne page ! Dans cet article, nous avons rassemblé 5 ...
2021-01-15
Fabricants de purificateurs d'air, Nouvelles
Contaminant Engineering•3 min read

PFAS Water Filtration Technologies Explained: Carbon, Resin & RO

Key Takeaway:

PFAS reduction depends on the specific compounds present, treatment media, contact time, water chemistry, and system design. Activated carbon, ion exchange, and Reverse Osmosis address PFAS through different mechanisms.

PFAS are a large family of persistent fluorinated compounds that can occur in drinking-water supplies. Their treatment behavior varies significantly by molecular structure, chain length, functional group, concentration, and the chemistry of the source water.

Granular Activated Carbon (GAC) removes PFAS primarily through adsorption. It is generally more effective for many longer-chain PFAS, while shorter-chain compounds tend to break through more quickly. Carbon performance depends on media properties, Empty Bed Contact Time (EBCT), competing organic matter, loading, and replacement frequency.

Ion-exchange resins use charged functional sites to capture many PFAS compounds. Properly selected anion-exchange media can provide high capacity and may perform better than conventional activated carbon for some shorter-chain PFAS, although performance still depends on water chemistry and competing ions.

Reverse Osmosis (RO) uses membrane separation rather than adsorption. Properly designed RO systems can provide broad reduction across many PFAS compounds as well as dissolved salts and other contaminants. Unlike carbon or resin, however, RO also produces a concentrate stream that must be managed.

No single technology should be selected from a PFAS label alone. System design should consider which PFAS compounds are present, their concentrations, required reduction targets, flow rate, media life, and the applicable third-party certification or validation requirements.

HisoAir Water Technical Series
Product Discovery•3 min read

How to Choose an Under-Sink Water Purifier for Modern Kitchens

Key Takeaway:

Match the treatment technology to your water quality first, then evaluate cabinet space, faucet configuration, flow rate, drain and power requirements, and filter replacement needs.

Choosing an under-sink water purifier starts with water chemistry. Carbon filtration is well suited to chlorine, taste, odor, and many organic contaminants, while Reverse Osmosis is more appropriate when dissolved salts, fluoride, nitrates, or broader dissolved contaminants need to be reduced.

For compact kitchens, tankless RO systems eliminate the conventional storage tank and can significantly reduce the space required under the sink. However, membrane capacity stated in GPD does not directly equal faucet flow. When comparing systems, check the actual dispensing flow rate, inlet-pressure requirement, recovery ratio, and whether a booster pump is required.

Installation architecture also matters. Many RO systems require a drain connection, electrical power, and either a dedicated drinking-water faucet or a compatible multi-function faucet. High-flow carbon systems can often connect directly to the existing cold-water line with a simpler installation, but pressure drop and available faucet flow should still be verified.

RO also removes much of the naturally occurring dissolved mineral content. Where taste or mineral balance is a priority, a post-RO remineralization stage can be added. Filter life should be evaluated by both rated capacity and local water quality rather than replacement time alone.

The right system is therefore not simply the smallest or highest-GPD model. It is the configuration that matches the target contaminants, available cabinet space, desired faucet setup, peak dispensing demand, and maintenance expectations.

HisoAir Water Technical Series
Water Quality•2 min read

What Does TDS Mean in Drinking Water? Measurement vs Contaminant Reality

Key Takeaway:

A TDS meter estimates the overall concentration of dissolved ionic substances from electrical conductivity. It cannot identify specific contaminants or determine whether water is chemically safe.

Total Dissolved Solids (TDS) refers to the combined concentration of dissolved substances in water. Most handheld TDS meters do not measure TDS directly. Instead, they measure electrical conductivity (EC) and convert that reading into an estimated parts-per-million (ppm) value.

This means a TDS reading can indicate how much dissolved ionic material is present, but not what that material actually is. Calcium, magnesium, sodium, nitrates, and other dissolved ions can all contribute to conductivity, yet a simple TDS meter cannot distinguish between them.

TDS meters are also not suitable for detecting trace contaminants such as PFAS, many VOCs, pesticides, pharmaceuticals, or disinfection byproducts. These substances may be present at concentrations far below the level needed to noticeably change electrical conductivity.

A low TDS reading therefore does not guarantee safe drinking water, and a higher TDS reading does not automatically indicate contamination. Water-treatment decisions should be based on laboratory testing for specific contaminants of concern rather than TDS alone.

HisoAir Water Technical Series
Technology Selection•2 min read

RO vs UF Water Filtration: Understanding Pore Sizes & Dissolved Minerals

Key Takeaway:

Ultrafiltration can reduce bacteria, turbidity, and suspended particles while retaining most naturally occurring dissolved minerals. Reverse Osmosis provides much broader reduction of dissolved salts and smaller contaminants.

Ultrafiltration (UF) typically uses hollow-fiber membranes with pore sizes in the approximate 0.01–0.1 micron range. These membranes physically retain turbidity, suspended solids, colloids, and many microorganisms while allowing dissolved minerals and salts to remain in the water.

Reverse Osmosis (RO) operates at a much finer separation level. Unlike UF, RO can substantially reduce dissolved ions such as sodium, calcium, fluoride, nitrates, and other contributors to total dissolved solids (TDS). This makes RO more suitable when dissolved-salt reduction is a primary treatment objective.

UF generally requires less system pressure and produces little or no continuous concentrate stream in many point-of-use configurations. RO typically requires greater pressure and produces a reject-water stream, but delivers broader contaminant reduction.

For water with acceptable TDS and mineral content, UF can be a simpler mineral-retaining treatment option. Where dissolved salts, fluoride, nitrates, or broader dissolved contaminants are a concern, RO is generally the more appropriate technology.

HisoAir Water Technical Series
Technology Selection•4 min read

Carbon Block vs Reverse Osmosis: Which Fits Your Need?

Key Takeaway:

Choose RO for dissolved inorganic salts and heavy metals; choose Carbon Block for chemical taste/odor, no wastewater, and high line-pressure flow.

Reverse Osmosis (RO) and Carbon Block filtration represent two fundamentally different treatment methods: membrane separation and adsorption. Understanding these differences helps determine which technology is better suited to a specific water-quality requirement.

Reverse Osmosis uses a semi-permeable membrane with pore sizes of approximately 0.0001 microns. It can significantly reduce dissolved inorganic contaminants such as TDS, fluoride, nitrates, and certain heavy metals. Because water must be forced through the membrane, RO systems require sufficient pressure or a booster pump and generate a concentrated wastewater stream.

Carbon Block filtration relies primarily on adsorption through compressed activated carbon, commonly with nominal pore sizes around 0.5–5 microns. It is highly effective for chlorine, chloramines, VOCs, taste, and odor, while allowing substantially higher direct-flow rates without producing wastewater.

From an operating perspective, Carbon Block systems are generally simpler, require less energy, and avoid the water loss associated with RO. RO involves higher system complexity and operating cost, but provides substantially broader reduction of dissolved contaminants that Carbon Block alone cannot address.

HisoAir Water Technical Series

DEMANDER UN DEVIS