新しいタブで開きます
革新的な空気品質ソリューション

空気消毒機はコヴィッドからあなたを守れるか?

Related Products

アン 空気消毒機 レストランやビジネス、医療業界では、空気殺菌機が必要でしょう。空気殺菌機はどのようにしてコヴィッド19からあなたを守り、より安全な室内空気を促進するのでしょうか?見かけによらずいろいろなことがある!

コロナウイルスは空気感染するのか?

専門家によれば、Covid-19は主に人から人へ感染するという。しかし、空気感染もあり得るのだろうか?

答えはイエスだ。ウイルスが空気中で最大5日間生存できることを示す証拠がいくつかある。 3時間.吸い込むと肺に入り、感染する。

さらに、感染した飛沫や咳、会話、くしゃみから出るエアロゾルが、いかに感染拡大に寄与するかもわかっている。エアロゾルは空気中のウイルスを鼻や口に運びます。

空気消毒機はパンデミックにどう役立つのか?

専門家の間でも、空気中にどのように広がっていくのかについては意見が分かれている、 室内の空気をきれいにすることは、空気感染から人々を守るために非常に重要である。

さらに、SARS-CoV-2は急速に広がる可能性があり、公共の場や医療現場に大きな影響を与える。

従って、このような場合は UV空気殺菌システム または 空気消毒機 感染した空気が人の手に渡る前に浄化することができます。このような特殊な空気清浄機を適切に使用すれば、屋内で起こりうる感染から顧客、顧客、家族を守ることができる。

FDAはまた、UV空気清浄機が公衆衛生と安全のための感染症対策と地域社会の緩和に役立つと考えている。

スマート空気消毒機とは?

空気殺菌機は、空気中に存在するアレルゲンを捕捉し、かつ殺菌することを可能にするいくつかの機能を備えている。空気殺菌とは、人々に病気や肺の炎症を引き起こす病原性微生物の除去を意味する。

のような特殊な空気消毒機もある。 空気殺菌機散発的な汚染物質やバクテリアも殺すことができる。

空気消毒機と関連する、または同じ目的を持つ他の名称は以下の通りである:

  • UV空気清浄機
  • UV空気清浄機
  • マイナスイオン空気清浄機
  • 医療用空気清浄機
  • フレッシュ・エア・マシン
  • オゾン発生器空気清浄機
  • HEPAフィルター空気清浄機
  • その他多数

空気消毒機の仕組み

空気清浄機は、汚染された空気中の99.97%のウイルスや汚れを捕捉し、波長の短いUV-Cライト(紫外線)で病原体を死滅させます。H13HEPAフィルターを通して照射される紫外線は、微生物の細胞機能を破壊することにより、微生物を破壊します。したがって、空気は浄化され、呼吸できるようになる。

室内空気消毒機の構成部品

空気の紫外線消毒 空気殺菌機には、さまざまなフィルターや部品が使われている。具体的には、空気殺菌機はポータブル空気清浄機と比較して、いくつかの特殊なフィルターを持っています。

空気消毒機用フィルター
空気消毒機用フィルター

1.プレフィルター

このフィルターは空気消毒機の「フロント・ライナー」で、大きな粒子を捕捉するため、ほとんどの粒子が二次フィルターに到達することはない。使い捨てのものと、洗浄可能なフィルター部品がある。動物の毛、ほこり、花粉などの大きな粒子がその例である。

2.プラズマフィルター

について プラズマフィルター は、病院や医療施設で病原体を捕捉し、空気を浄化するために使用される高性能フィルターである。

3.活性炭フィルター

活性炭フィルターは、悪臭、スモッグ、揮発性有機化合物(VOC)、化学物質、煙を捕捉する吸着層である。また、ホルムアルデヒド、トルエン、アセトンなど、健康問題を引き起こす空気中の化学物質を除去することもできる。

4.H13医療グレードHEPAフィルター

H13 HEPAフィルターは、医療現場で理想的に使用される最大侵入サイズ粒子(MPPS)の99.95%をブロックすることができます。このフィルターは0.21ミクロンのウイルスとバクテリアを捕捉することができ、標準的なHEPAよりもはるかに効果的に設計されています。

5.光触媒フィルター

光触媒フィルターは、有機汚染物質や有機物を破壊することができるチタンアパタイトで設計されています。さらに、PCO光触媒フィルターは、空気清浄機で捕獲されたコロナウイルスの破壊に効果的です。

6.UVCランプ

HEPAフィルターとUVCランプは、空気中のコロナウイルスやその他の種類のバクテリアやウイルスを実質的に捕捉し、破壊することができます。UVC LEDランプは、これらのウイルスの微生物活動を無力化し、空気中から完全に除去する効果があります。

7.マイナスイオン

マイナスイオンを空気中に放出し、空気を清浄化する。マイナスイオン空気清浄機は、空気清浄用のオゾン発生器とよく混同される。後者は健康に悪いオゾンを放出するが、マイナスイオン清浄機は静電引力によって粒子を帯電させるだけである。粒子は引き寄せられ、空気清浄機内の導体プレートに落ちる。

空気消毒機の使用場所

  • PPE以外の労働者保護
  • 顧客保護
  • 医療従事者と患者の保護
  • 産業の煙、煙、化学物質からの保護
  • 過剰なペットの糞からの保護

どのような機能に注目すべきか?

空気除菌機を選ぶ際には、このような特徴も探してみるといいだろう:

  • 電力使用量
  • 騒音レベル
  • 保証
  • メーカー評判
  • ラベリング

消費電力

空気滅菌器は24時間365日稼働するものであるため、電気代への影響を最小限に抑えるためには、消費電力が少ないことが望ましい。ほとんどの場合 家庭用UV空気殺菌機 は40ワットから200ワットまである。さらに、エネルギー・スター(Energy Star)の評価を受けている機種を探しましょう。これは、同じサイズの他のモデルと比較して、マシンのエネルギー効率を示しています。

外出時は常に低速で運転すれば、より節約できる。大規模な施設では、ろ過される空気の質に応じて自動的に速度を調節するスマートな空気消毒機を探すことができる。

騒音レベル(デシベル)

利便性の面では、空気殺菌機の騒音レベルについて詳しく知っておく必要があります。ほとんどの空気清浄機は静かに運転すると宣伝されていますが、ファンの回転数を上げると騒音レベルも上がるので、騒音レベルをテストしてみてください。

一般的な空気殺菌機は、最大で 5つのファンモード(静音、低、中、高、ターボ)自動または手動で調整できます。自動モードで運転すると、ファンは空気の質に応じて自動調整します。

空気殺菌機の騒音レベルは、冷蔵庫のハムノイズに近い。 20~60デシベル.それでも音が気になる場合は、"サイレントモード "や "ナイトモード "のオプションがある空気清浄機を選ぼう。また、機械式フィルター付きの清浄機を使う代わりに、次のような選択肢もある。 マイナスイオン空気清浄機ファンを使用しないため、より静かに動作する。

空気清浄機の運転音が常にうるさくならないようにするには、部屋に合ったサイズの空気清浄機を選ぶようにしましょう。サイズが合わないと、ターボモードで運転することが多くなるかもしれません。騒音が非常に気になる場合は、適切なサイズの空気清浄機を選ぶか、スペースが必要とする容量よりもさらに大きな容量の空気清浄機を選びましょう。

保証

購入する前に、保証書を見てください。販売員やカスタマーサービス担当者に相談すれば、マシンとその部品の保証について詳しく説明してくれる。これは、万が一マシンが故障した場合に、交換や修理、払い戻しが面倒なことにならないようにするためです。

メーカー

たくさんある。 ブランド 医療グレードの空気清浄機で、市場での評判が高いものをいくつか紹介しよう。以下にいくつか紹介するが、このリストに限定されるものではない:

  • IQエアー
  • ラビット・エア
  • ブルーエア
  • ジャームガーディアン
  • レボワ
  • ヒソエア
  • その他

これらは今、市場で最高のオプションの一部である。これらの企業は、長年にわたってこの業界を運営してきた。さらに、会社だけでなく、あなたの家に合っているかどうかを確認するために、モデルをよりよく見ておく必要があります。

OEM/ODMの場合、HEPA試験報告書と検証証明書を提示することを確認すれば、OEM/ODMメーカーも信頼できる機械の供給元となる。

もし、そのメーカーから購入したいのであれば、メーカーと連絡を取ることをお勧めする。 空気清浄機 メーカー 中国.試験報告書、製品コンプライアンス、さらには稼働中の製品や工場の写真やビデオも要求できる。

ラベリング

FDAは、空気清浄機について、特にコロナウィルスのパンデミック時に、顧客が機械の使用方法を理解できるような表示をすることを推奨している。彼らは、装置の性能、すなわち最大運転領域、運転寿命について明確に説明することを推奨している。

さらにFDAは、紫外線空気滅菌器の紫外線暴露のようなリスクや危険に対する明確な警告も推奨している。また、操作の完全な手順も顧客に提供されるべきである。

まとめ

空気清浄機を適切に使用すれば、空気中に浮遊する汚染物質が家庭や企業、病院に流入するのを防ぐことができる。空気清浄機だけでは、コヴィッド19から人々を守るには不十分であることに注意してください。適切な距離を保ち、適切な手洗いと消毒を行い、空気清浄機を使用することで、すべての人を守ることができる。

一流の空気殺菌機をお探しなら、ヒソエアにお任せください。当社は、お客様の施設をCovid-19から確実に守るために、数種類の空気殺菌紫外線濾過システムと技術を製造しています。

シェアする
Alwen Lee of HisoAir
Alwen Lee, an air purification expert with over 10 years of experience, is a devoted father of two and a passionate traveler, having explored more than 30 countries. With a love for public speaking and swimming, he has dedicated his life to the indoor air quality industry. His mission is to ensure that people around the world enjoy the freedom to breathe clean air and lead happy, healthy lives.

メッセージを送る

Related Products

もっと読む

Modern living room with a family enjoying a healthy indoor environment monitored by smart devices, natural lighting, and greenery.

After IFA 2026: The Healthy Home Is Moving Beyond Smart Devices

In our previous IFA 2026 column, Air Purification Is Becoming Part of the Healthy-Home Platform, we argued that the next generation of indoor-health products would ...
ニュース
Modern living room and kitchen with smart home air quality devices including an air purifier, humidifier, and water filtration system, connected with visualized blue connectivity lines.

IFA 2026: Air Purification Is Becoming Part of the Healthy-Home Platform

Pre-IFA Industry Perspective | September 4, 2026 This article is based on official announcements and regulatory information available ahead of IFA 2026, which takes place ...
ニュース
A modern office room with a gray wall-mounted air purifier, large wooden desk, office chairs, indoor plants, and glass windows offering a city view.

Luftreiniger gegen Staub: HEPA-Luftreinigung für Büro, Gewerbe und Industrie

Kurz gesagt: Ein Luftreiniger entfernt Staub aus der Luft – nicht vom Schreibtisch. Er reduziert die Konzentration schwebender Partikel und damit auch die Menge an ...
Air purifier, Filter
Comparison infographic showcasing the differences between carbon block filter and activated carbon fiber. Detailed diagrams illustrate the hierarchical porous structure of the carbon block with long diffusion paths and the open microporous structure of the activated carbon fiber with direct access for PFAS adsorption.

Carbon Block vs. Activated Carbon Fiber (ACF): Matching Media to Target Contaminants

Two carbon media. Same adsorption chemistry. Very different behaviour in a point-of-use cartridge. If you are specifying a water purifier platform for a PFAS-aware market, ...
ニュース
NSF base listing and ANF private-label certification pathway for OEM water filters

What Is an NSF Master Listing? A Guide to Base Listings, ANF Certification and OEM Water Filters

For a brand preparing to launch an OEM water purifier, one of the most common supplier claims is: “We already have an NSF master listing, ...
News, Water Purifiers
Healthy-home brand team reviewing PFAS water filter certification, test data and product engineering

Entering the Water Category Is Easy. Building a Credible PFAS Claim Is Much Harder

For air purification, appliance and healthy-home brands, entering the water category can look surprisingly easy. A company can select an existing undersink system, customize its ...
ニュース
Contaminant Engineering•3 min read

PFAS Water Filtration Technologies Explained: Carbon, Resin & RO

Key Takeaway:

PFAS reduction depends on the specific compounds present, treatment media, contact time, water chemistry, and system design. Activated carbon, ion exchange, and Reverse Osmosis address PFAS through different mechanisms.

PFAS are a large family of persistent fluorinated compounds that can occur in drinking-water supplies. Their treatment behavior varies significantly by molecular structure, chain length, functional group, concentration, and the chemistry of the source water.

Granular Activated Carbon (GAC) removes PFAS primarily through adsorption. It is generally more effective for many longer-chain PFAS, while shorter-chain compounds tend to break through more quickly. Carbon performance depends on media properties, Empty Bed Contact Time (EBCT), competing organic matter, loading, and replacement frequency.

Ion-exchange resins use charged functional sites to capture many PFAS compounds. Properly selected anion-exchange media can provide high capacity and may perform better than conventional activated carbon for some shorter-chain PFAS, although performance still depends on water chemistry and competing ions.

Reverse Osmosis (RO) uses membrane separation rather than adsorption. Properly designed RO systems can provide broad reduction across many PFAS compounds as well as dissolved salts and other contaminants. Unlike carbon or resin, however, RO also produces a concentrate stream that must be managed.

No single technology should be selected from a PFAS label alone. System design should consider which PFAS compounds are present, their concentrations, required reduction targets, flow rate, media life, and the applicable third-party certification or validation requirements.

HisoAir Water Technical Series
Product Discovery•3 min read

How to Choose an Under-Sink Water Purifier for Modern Kitchens

Key Takeaway:

Match the treatment technology to your water quality first, then evaluate cabinet space, faucet configuration, flow rate, drain and power requirements, and filter replacement needs.

Choosing an under-sink water purifier starts with water chemistry. Carbon filtration is well suited to chlorine, taste, odor, and many organic contaminants, while Reverse Osmosis is more appropriate when dissolved salts, fluoride, nitrates, or broader dissolved contaminants need to be reduced.

For compact kitchens, tankless RO systems eliminate the conventional storage tank and can significantly reduce the space required under the sink. However, membrane capacity stated in GPD does not directly equal faucet flow. When comparing systems, check the actual dispensing flow rate, inlet-pressure requirement, recovery ratio, and whether a booster pump is required.

Installation architecture also matters. Many RO systems require a drain connection, electrical power, and either a dedicated drinking-water faucet or a compatible multi-function faucet. High-flow carbon systems can often connect directly to the existing cold-water line with a simpler installation, but pressure drop and available faucet flow should still be verified.

RO also removes much of the naturally occurring dissolved mineral content. Where taste or mineral balance is a priority, a post-RO remineralization stage can be added. Filter life should be evaluated by both rated capacity and local water quality rather than replacement time alone.

The right system is therefore not simply the smallest or highest-GPD model. It is the configuration that matches the target contaminants, available cabinet space, desired faucet setup, peak dispensing demand, and maintenance expectations.

HisoAir Water Technical Series
Water Quality•2 min read

What Does TDS Mean in Drinking Water? Measurement vs Contaminant Reality

Key Takeaway:

A TDS meter estimates the overall concentration of dissolved ionic substances from electrical conductivity. It cannot identify specific contaminants or determine whether water is chemically safe.

Total Dissolved Solids (TDS) refers to the combined concentration of dissolved substances in water. Most handheld TDS meters do not measure TDS directly. Instead, they measure electrical conductivity (EC) and convert that reading into an estimated parts-per-million (ppm) value.

This means a TDS reading can indicate how much dissolved ionic material is present, but not what that material actually is. Calcium, magnesium, sodium, nitrates, and other dissolved ions can all contribute to conductivity, yet a simple TDS meter cannot distinguish between them.

TDS meters are also not suitable for detecting trace contaminants such as PFAS, many VOCs, pesticides, pharmaceuticals, or disinfection byproducts. These substances may be present at concentrations far below the level needed to noticeably change electrical conductivity.

A low TDS reading therefore does not guarantee safe drinking water, and a higher TDS reading does not automatically indicate contamination. Water-treatment decisions should be based on laboratory testing for specific contaminants of concern rather than TDS alone.

HisoAir Water Technical Series
Technology Selection•2 min read

RO vs UF Water Filtration: Understanding Pore Sizes & Dissolved Minerals

Key Takeaway:

Ultrafiltration can reduce bacteria, turbidity, and suspended particles while retaining most naturally occurring dissolved minerals. Reverse Osmosis provides much broader reduction of dissolved salts and smaller contaminants.

Ultrafiltration (UF) typically uses hollow-fiber membranes with pore sizes in the approximate 0.01–0.1 micron range. These membranes physically retain turbidity, suspended solids, colloids, and many microorganisms while allowing dissolved minerals and salts to remain in the water.

Reverse Osmosis (RO) operates at a much finer separation level. Unlike UF, RO can substantially reduce dissolved ions such as sodium, calcium, fluoride, nitrates, and other contributors to total dissolved solids (TDS). This makes RO more suitable when dissolved-salt reduction is a primary treatment objective.

UF generally requires less system pressure and produces little or no continuous concentrate stream in many point-of-use configurations. RO typically requires greater pressure and produces a reject-water stream, but delivers broader contaminant reduction.

For water with acceptable TDS and mineral content, UF can be a simpler mineral-retaining treatment option. Where dissolved salts, fluoride, nitrates, or broader dissolved contaminants are a concern, RO is generally the more appropriate technology.

HisoAir Water Technical Series
Technology Selection•4 min read

Carbon Block vs Reverse Osmosis: Which Fits Your Need?

Key Takeaway:

Choose RO for dissolved inorganic salts and heavy metals; choose Carbon Block for chemical taste/odor, no wastewater, and high line-pressure flow.

Reverse Osmosis (RO) and Carbon Block filtration represent two fundamentally different treatment methods: membrane separation and adsorption. Understanding these differences helps determine which technology is better suited to a specific water-quality requirement.

Reverse Osmosis uses a semi-permeable membrane with pore sizes of approximately 0.0001 microns. It can significantly reduce dissolved inorganic contaminants such as TDS, fluoride, nitrates, and certain heavy metals. Because water must be forced through the membrane, RO systems require sufficient pressure or a booster pump and generate a concentrated wastewater stream.

Carbon Block filtration relies primarily on adsorption through compressed activated carbon, commonly with nominal pore sizes around 0.5–5 microns. It is highly effective for chlorine, chloramines, VOCs, taste, and odor, while allowing substantially higher direct-flow rates without producing wastewater.

From an operating perspective, Carbon Block systems are generally simpler, require less energy, and avoid the water loss associated with RO. RO involves higher system complexity and operating cost, but provides substantially broader reduction of dissolved contaminants that Carbon Block alone cannot address.

HisoAir Water Technical Series

見積依頼