Opens in a new tab
Innovative Air Quality Solutions

News

Close-up of HEPA and carbon filters side by side

How Can You Extend the Lifespan of Your Air Purifier Filters?

To prolong the lifespan of your air purifier filters, it's essential to maintain them regularly. Vacuuming dust off pre-filters can significantly enhance their longevity. Opting ...
2024-11-17
News
A modern air purifier in a minimalist room with greenery, representing key factors in manufacturer selection.

What Are the 5 Key Factors to Consider When Choosing a Reliable Air Purifier Manufacturer?

Choosing the right air purifier manufacturer is essential for ensuring clean and healthy air. This guide outlines five crucial factors—expertise in air purification technology, customization ...
2024-11-17
News
HisoAir-HA1223-Desktop-Air-Purifier

How to Build a Custom Air Purifier: From Concept to Market with OEM Services

In today’s competitive air purification market, a custom air purifier allows brands to differentiate themselves with unique features, tailored designs, and specific functionalities that appeal ...
2024-11-15
News
iq air purifier enhancing air quality in a dental clinic

Why Are IQAir Air Purifiers So Expensive?

When considering an IQAir air purifier, many potential buyers are often taken aback by the price tag. However, the cost reflects unique features such as ...
2024-11-15
News
Close-up of HEPA and carbon filters side by side

HEPA vs. Carbon Filters: Which One Enhances Air Quality Better?

In the quest for cleaner indoor air, choosing between HEPA and carbon filters is crucial. HEPA filters are known for their ability to trap microscopic ...
2024-11-15
News
Air purifier in a living room reducing dust

How Effective Are Air Purifiers at Reducing Dust?

As I navigated my quest for cleaner air in my home, I found myself surrounded by conflicting information about air purifiers. Many claim to reduce ...
2024-11-15
News
Air purifier with certification labels and a compliance checklist

How Can You Ensure Your Air Purifier Manufacturer Complies with U.S. Standards and Certifications?

Navigating the complexities of air purifier standards is crucial for ensuring safety and effectiveness. To ensure an air purifier manufacturer complies with U.S. standards, verify ...
2024-11-14
News
Smart air purifier with IoT and AI features in a modern living room

How Can IoT and AI Revolutionize Air Purifier Functionality?

The air purification landscape is on the brink of a significant transformation. By integrating IoT and AI technologies, air purifiers are becoming smarter, offering real-time ...
2024-11-13
News

Which Country Leads in Air Purifier Production: China or India?

As the world becomes increasingly aware of air quality issues, the demand for air purifiers has skyrocketed. This article explores the competitive landscape between China ...
2024-11-13
News
Air purifiers on a production line in a factory setting

Which Country Leads in Air Purifier Production: Malaysia or China?

As air quality concerns rise, so does the demand for air purifiers. This article explores whether the origin of these devices matters, focusing on the ...
2024-11-13
News
Professional testing room with air purifier and sound level meter

How Can You Effectively Test Noise Levels in Air Purifiers?

If you’re like me, a peaceful environment is essential for relaxation and productivity. When I invested in an air purifier, I was concerned about the ...
2024-11-13
News
Comparison of air purifier production in China and Mexico with factory backdrops

Which Country is Leading in Air Purifier Production: China or Mexico?

As air quality concerns rise globally, the production of air purifiers has become a hot topic. China currently dominates this market with over 70% share ...
2024-11-13
News
Contaminant Engineering•3 min read

PFAS Water Filtration Technologies Explained: Carbon, Resin & RO

Key Takeaway:

PFAS reduction depends on the specific compounds present, treatment media, contact time, water chemistry, and system design. Activated carbon, ion exchange, and Reverse Osmosis address PFAS through different mechanisms.

PFAS are a large family of persistent fluorinated compounds that can occur in drinking-water supplies. Their treatment behavior varies significantly by molecular structure, chain length, functional group, concentration, and the chemistry of the source water.

Granular Activated Carbon (GAC) removes PFAS primarily through adsorption. It is generally more effective for many longer-chain PFAS, while shorter-chain compounds tend to break through more quickly. Carbon performance depends on media properties, Empty Bed Contact Time (EBCT), competing organic matter, loading, and replacement frequency.

Ion-exchange resins use charged functional sites to capture many PFAS compounds. Properly selected anion-exchange media can provide high capacity and may perform better than conventional activated carbon for some shorter-chain PFAS, although performance still depends on water chemistry and competing ions.

Reverse Osmosis (RO) uses membrane separation rather than adsorption. Properly designed RO systems can provide broad reduction across many PFAS compounds as well as dissolved salts and other contaminants. Unlike carbon or resin, however, RO also produces a concentrate stream that must be managed.

No single technology should be selected from a PFAS label alone. System design should consider which PFAS compounds are present, their concentrations, required reduction targets, flow rate, media life, and the applicable third-party certification or validation requirements.

HisoAir Water Technical Series
Product Discovery•3 min read

How to Choose an Under-Sink Water Purifier for Modern Kitchens

Key Takeaway:

Match the treatment technology to your water quality first, then evaluate cabinet space, faucet configuration, flow rate, drain and power requirements, and filter replacement needs.

Choosing an under-sink water purifier starts with water chemistry. Carbon filtration is well suited to chlorine, taste, odor, and many organic contaminants, while Reverse Osmosis is more appropriate when dissolved salts, fluoride, nitrates, or broader dissolved contaminants need to be reduced.

For compact kitchens, tankless RO systems eliminate the conventional storage tank and can significantly reduce the space required under the sink. However, membrane capacity stated in GPD does not directly equal faucet flow. When comparing systems, check the actual dispensing flow rate, inlet-pressure requirement, recovery ratio, and whether a booster pump is required.

Installation architecture also matters. Many RO systems require a drain connection, electrical power, and either a dedicated drinking-water faucet or a compatible multi-function faucet. High-flow carbon systems can often connect directly to the existing cold-water line with a simpler installation, but pressure drop and available faucet flow should still be verified.

RO also removes much of the naturally occurring dissolved mineral content. Where taste or mineral balance is a priority, a post-RO remineralization stage can be added. Filter life should be evaluated by both rated capacity and local water quality rather than replacement time alone.

The right system is therefore not simply the smallest or highest-GPD model. It is the configuration that matches the target contaminants, available cabinet space, desired faucet setup, peak dispensing demand, and maintenance expectations.

HisoAir Water Technical Series
Water Quality•2 min read

What Does TDS Mean in Drinking Water? Measurement vs Contaminant Reality

Key Takeaway:

A TDS meter estimates the overall concentration of dissolved ionic substances from electrical conductivity. It cannot identify specific contaminants or determine whether water is chemically safe.

Total Dissolved Solids (TDS) refers to the combined concentration of dissolved substances in water. Most handheld TDS meters do not measure TDS directly. Instead, they measure electrical conductivity (EC) and convert that reading into an estimated parts-per-million (ppm) value.

This means a TDS reading can indicate how much dissolved ionic material is present, but not what that material actually is. Calcium, magnesium, sodium, nitrates, and other dissolved ions can all contribute to conductivity, yet a simple TDS meter cannot distinguish between them.

TDS meters are also not suitable for detecting trace contaminants such as PFAS, many VOCs, pesticides, pharmaceuticals, or disinfection byproducts. These substances may be present at concentrations far below the level needed to noticeably change electrical conductivity.

A low TDS reading therefore does not guarantee safe drinking water, and a higher TDS reading does not automatically indicate contamination. Water-treatment decisions should be based on laboratory testing for specific contaminants of concern rather than TDS alone.

HisoAir Water Technical Series
Technology Selection•2 min read

RO vs UF Water Filtration: Understanding Pore Sizes & Dissolved Minerals

Key Takeaway:

Ultrafiltration can reduce bacteria, turbidity, and suspended particles while retaining most naturally occurring dissolved minerals. Reverse Osmosis provides much broader reduction of dissolved salts and smaller contaminants.

Ultrafiltration (UF) typically uses hollow-fiber membranes with pore sizes in the approximate 0.01–0.1 micron range. These membranes physically retain turbidity, suspended solids, colloids, and many microorganisms while allowing dissolved minerals and salts to remain in the water.

Reverse Osmosis (RO) operates at a much finer separation level. Unlike UF, RO can substantially reduce dissolved ions such as sodium, calcium, fluoride, nitrates, and other contributors to total dissolved solids (TDS). This makes RO more suitable when dissolved-salt reduction is a primary treatment objective.

UF generally requires less system pressure and produces little or no continuous concentrate stream in many point-of-use configurations. RO typically requires greater pressure and produces a reject-water stream, but delivers broader contaminant reduction.

For water with acceptable TDS and mineral content, UF can be a simpler mineral-retaining treatment option. Where dissolved salts, fluoride, nitrates, or broader dissolved contaminants are a concern, RO is generally the more appropriate technology.

HisoAir Water Technical Series
Technology Selection•4 min read

Carbon Block vs Reverse Osmosis: Which Fits Your Need?

Key Takeaway:

Choose RO for dissolved inorganic salts and heavy metals; choose Carbon Block for chemical taste/odor, no wastewater, and high line-pressure flow.

Reverse Osmosis (RO) and Carbon Block filtration represent two fundamentally different treatment methods: membrane separation and adsorption. Understanding these differences helps determine which technology is better suited to a specific water-quality requirement.

Reverse Osmosis uses a semi-permeable membrane with pore sizes of approximately 0.0001 microns. It can significantly reduce dissolved inorganic contaminants such as TDS, fluoride, nitrates, and certain heavy metals. Because water must be forced through the membrane, RO systems require sufficient pressure or a booster pump and generate a concentrated wastewater stream.

Carbon Block filtration relies primarily on adsorption through compressed activated carbon, commonly with nominal pore sizes around 0.5–5 microns. It is highly effective for chlorine, chloramines, VOCs, taste, and odor, while allowing substantially higher direct-flow rates without producing wastewater.

From an operating perspective, Carbon Block systems are generally simpler, require less energy, and avoid the water loss associated with RO. RO involves higher system complexity and operating cost, but provides substantially broader reduction of dissolved contaminants that Carbon Block alone cannot address.

HisoAir Water Technical Series

REQUEST A QUOTE